User manual TOSHIBA SATELLITE 220 FIELD REPLACEABLE UNIT DOCUMENTATION

[. . . ] PCMCIA is a trademark of the Personal Computer Memory Card International Association. Intel and Pentium are registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries. PowerQuest and Drive Image are registered trademarks of PowerQuest Corporation. Netscape 7. 0 is a registered trademark of Netscape Communications Corporation. [. . . ] Static WEP keys entered in hexadecimal code format will be either ten characters (40-bit) or twenty-six characters (104-bit) in length. Valid characters are 0 - 9, A - F. Ad Hoc Networks: Assign the same net-work key to all the personal computers to be connected. Access Point (Infrastructure) Networks: Assign the identical network key that is programmed into the access point. Enter a profile name in the Profile Name field. obtained from your RADIUS server or other certification server. From the General settings page, click the new profile name shown in the Profile List. Use the up and down arrows to position the priority of the new profile in the priority list. The Mandatory AP option is only used if Infrastructure mode is selected. Click the Mandatory AP button, enter the MAC address for the access point. If you are using Cisco CCX, click the Enable Cisco Client eXtentions option to enable Cisco CKIP data encryption on the Security Settings page. If you have checked the Cisco's "Mixed-Cell" box in the Advanced Setting, this option must also be checked. Select Open, Shared, WPA, or WPA-PSK in the Network Authentication options. 6. Enter the desired name in less than 15 ASCII character code format. Identifiability can be enhanced by entering the model number, the user name, and other factors. For ad hoc connection: Assign the same network name to all personal computers existing on the network. For access point (infrastructure) connection: Assign the name of the work group to be accessed. If a message is displayed that requests you to restart the personal computer, click [Yes] to restart the computer. 7. For ad hoc connection: Select [Use the following IP address:] and then enter data for [IP address] and [Subnet mask]. For access point (infrastructure) connection: If your network uses DHCP, select [Obtain an IP address automatically] and [Obtain DNS server address automatically]. If your network uses static IP addresses, consult with your network administrator for the correct IP address settings. 8. Processing will return to the [Wireless Network Connection Properties] window. Close the [Network Connection] window. Setting the sharing function Set the sharing function to make file and/or printer sharing with other network-connected personal computers valid. 58 W I r e l e s s L A N U s e r 's G u i d e This operation is not required unless the sharing function is to be used. The folder and printer for which the sharing function has been set will be usable from any personal computer present on the network. To share a file and/or the connected printer, you need to be logged in as an administrator. 2. Right-click the "work" folder (or whichever folder you want to share), and then click [Sharing and Security. . . ] in the menu displayed. [. . . ] RAM is much faster to access than ROM, however ROM contents are not lost when power is removed. Shadowing allows permanently stored information to be rapidly accessed. The optical digital audio format that allows you to download digital audio onto a MiniDisc recorder or connect to your sound system to play MP3 files with high fidelity sound. A specific technology of making RAM which does not require periodic data refreshing. [. . . ]