User manual TOSHIBA SATELLITE 2060CDS FIELD REPLACEABLE UNIT DOCUMENTATION

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual TOSHIBA SATELLITE 2060CDS. We hope that this TOSHIBA SATELLITE 2060CDS user guide will be useful to you.


TOSHIBA SATELLITE 2060CDS FIELD REPLACEABLE UNIT DOCUMENTATION: Download the complete user guide (1201 Ko)

Manual abstract: user guide TOSHIBA SATELLITE 2060CDSFIELD REPLACEABLE UNIT DOCUMENTATION

Detailed instructions for use are in the User's Guide.

[. . . ] PCMCIA is a trademark of the Personal Computer Memory Card International Association. Intel and Pentium are registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries. Sony MiniDisc and Memory Stick are trademarks of Sony Electronics, Inc. PowerQuest and Drive Image are registered trademarks of PowerQuest Corporation. [. . . ] Processing will return to the [Wireless Network Connection Properties] window. Verify that the network name entered in step 7 above is added in [Preferred Networks], and then click the [OK] button. In [Preferred Networks], register only the desired connection settings. a. Check the [Data encryption (WEP enabled)] check box For ad hoc connection: Clear the check mark from the [Network Authentication (Shared mode)] check box. For access point (infrastructure) connection: If the access point to be accessed has acquired shared-key authentication, check the [Network Authentication (Shared mode)] check box. Clear the check mark from the [The key is provided for me automatically] check box. Depending on the number of entered characters or digits, whether the key is an ASCII character code or a hexadecimal code will be identified automatically. 14. Close the [Wireless Network] window. Use five or thirteen characters to enter the key in the ASCII character code format. The characters that can be used as the "network key" are as follows: 0 - 9, A - Z, _ (underscore), or, Use 10 or 26 characters to enter the key in the hexadecimal character code format. The characters that can be used as the "network key" in 56 W I r e l e s s L A N U s e r 's G u id e CONNECTION TO THE NETWORK This section explains connection to the network. If there is an administrator of the network, contact the network administrator for data settings. Setting the network Perform the "Setting TCP/IP" and "Confirming the computer and work group names" operations required for network connection. If the Control Panel is in Category view, switch to Classic view by clicking "Switch to Classic View" under Control Panel the left frame. (If you are already in Classic view, "Switch to Category View" will be displayed. ) Double-click [Network Connections]. Right-click [Wireless Network Connection] in the list, and then click [Properties] in the menu displayed. The [Wireless Network Connection Properties] window will be displayed. If [File and Printer Sharing for Microsoft Networks] is displayed, proceed to step 6. If [File and Printer Sharing for Microsoft Networks] is not displayed, skip to step 7. Make sure that the [File and Printer Sharing for Microsoft Networks] check box is checked, and then click the [OK] button. Click [File and Printer Sharing for Microsoft Networks] and then click the [OK] button. Processing will return to the [Wireless Network Connection Properties] window, and [File and Printer Sharing for Microsoft Networks] will be added to the list. Click the link stating "If you understand the security risks, but want to share files without running the wizard, click here". Check the [Share this folder on the network] check box. To specify the corresponding folder as a read-only folder, select the [Read only] checkbox under the General tab. 3. [. . . ] Serial Port A connection to another device through which data is transferred one bit at a time on a single wire with any other wires only for control of the device not for transfer of data. Shadow RAM A technique of copying data or applications stored in ROM (Read Only Memory) into RAM (Random Access Memory) for access during actual operation. RAM is much faster to access than ROM, however ROM contents are not lost when power is removed. Shadowing allows permanently stored information to be rapidly accessed. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE TOSHIBA SATELLITE 2060CDS




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual TOSHIBA SATELLITE 2060CDS will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.