User manual TOSHIBA SATELLITE 5200-802

[. . . ] These copyrighted materials may be copied for private use at home only. If, beyond the limitation above, you copy (including to transform data formats) or modify these materials, transfer them or distribute them via the Internet without approval of copyright owners, you may be subject to claims for compensation for damage and/or criminal penalties due to infringements of copyrights or personal rights. Please remember to observe the copyright laws when you use this product to copy the copyrighted works or perform other actions. Please note that you may infringe the owner's rights protected by the copyright laws if you use the screen mode switching functions (e. g. [. . . ] Please use a commercially available HDMI cable to connect the television and computer. Not all televisions equipped with an HDMI input port have been tested for compatibility with this product. As such, Toshiba cannot guarantee that HD DVD-Video content can be displayed on all televisions equipped with an HDMI input port. HD DVD-Video content may not display properly on some televisions. Connecting to the Computer Turn off the television and computer before connecting. Insert the HDMI cable plug into the HDMI out port on the computer. HDMI out port Connecting the HDMI out port 2. Insert the remaining HDMI cable plug into the HDMI input port on the television. The volume dial or FN + ESC keys can be used to mute the computer audio. The volume level for both the television and computer can be adjusted using the WAVE item in "Volume Control". User's Manual 5-11 SATELLITE 5200-802 Switching between Computer and Television Display The following method can be used to display HD DVD-Video. The display method can be changed by changing the display device setting. Configure the following settings to display HD DVD-Video on the television. If the following settings are not configured, HD DVD-Video will not be displayed on the television. Notes on Operation Change the display device setting before playing HD DVD-Video. If your data is under DVD-R (SL) capacity, we suggest to use DVD-R (SL) media. You can use DVD-RAM discs that can be removed from a cartridge and DVD-RAM discs designed without a cartridge. You cannot use a disc with a 2. 6 GB single-sided capacity or 5. 2 GB double-sided capacity. Other DVD-ROM drives for computers or other DVD players may not be able to read DVD-R/+R/-RW/+RW/-RAM discs. Data written to a CD-R/DVD-R/+R disc cannot be deleted either in whole or in part. Data deleted (erased) from a CD-RW and DVD-RW/+RW/-RAM disc cannot be recovered. If multiple drives that can write data to discs are connected, be careful not to delete data from the wrong drive. In writing to a DVD-R/+R/-RW/+RW disc, some disc space is required for file management, so you may not be able to write the full capacity of the disc. User's Manual 5-15 SATELLITE 5200-802 Since the disc is based on the DVD-R/-RW standard, it will be filled with dummy data if the written data is less than about 1 GB. Even if you write only a small amount of data, it might take time to fill in the dummy data. Two types of DVD-R/+R/-RW/+RW/-RAM discs are on the market: data and video. You can use video discs on a DVD recorder as well as on your computer's DVD-ROM drive. [. . . ] I/O devices: Equipment used to communicate with the computer and transfer data to and from it. J jumper: A small clip or wire that allows you to change the hardware characteristics by electrically connecting two points of a circuit. K K: Taken from the Greek word kilo, meaning 1000; often used as equivalent to 1024, or 2 raised to the 10th power. KB: See kilobyte. L Light Emitting Diode (LED): A semiconductor device that emits light when a current is applied. Liquid Crystal Display (LCD): Liquid crystal sealed between two sheets of glass coated with transparent conducting material. The viewingside coating is etched into character forming segments with leads that extend to the edge of the glass. [. . . ]