User manual TOSHIBA SATELLITE 5100-503

[. . . ] These copyrighted materials may be copied for private use at home only. If, beyond the limitation above, you copy (including to transform data formats) or modify these materials, transfer them or distribute them via the Internet without approval of copyright owners, you may be subject to claims for compensation for damage and/or criminal penalties due to infringements of copyrights or personal rights. Please remember to observe the copyright laws when you use this product to copy the copyrighted works or perform other actions. Please note that you may infringe the owner's rights protected by the copyright laws if you use the screen mode switching functions (e. g. [. . . ] Always copy data from the hard disk drive to the CD-R/-RW, DVD-R/ -RW/-RAM or DVD+R/+RW disc. The original data will be lost if there is a write error. User's Manual 4-22 Operating Basics Disclaimer (DVD Super Multi drive) TOSHIBA does not bear responsibility for the following: Damage to any CD-R/RW or DVD-R/-RW/+R/+RW/-RAM disc that may be caused by writing or rewriting with this product. Any change or loss of the recorded contents of CD-R/RW or DVD-R/ -RW/+R/+RW/-RAM disc that may be caused by writing or rewriting with this product, or for any business profit loss or business interruption that may be caused by the change or loss of the recorded contents. Damage that may be caused by using third party equipment or software. Given the technological limitations of current optical disc writing drives, you may experience unexpected writing or rewriting errors due to disc quality or problems with hardware devices. Also, it is a good idea to make two or more copies of important data, in case of undesired change or loss of the recorded contents. TOSHIBA Disc Creator Note the following limitations when you use TOSHIBA Disc Creator: DVD-Video cannot be created using TOSHIBA Disc Creator. You cannot use the TOSHIBA Disc Creator "Audio CD" function to record music to the DVD-R/-RW or DVD+R/+RW media. Do not use the "Disc Backup" function of TOSHIBA Disc Creator to copy. DVD-RAM media cannot be backed up with the "Disc Backup" function of TOSHIBA Disc Creator. You cannot back up a CD-ROM or CD-R/RW to DVD-R/-RW or DVD+R/ +RW using the "Disc Backup" function of TOSHIBA Disc Creator. You cannot back up DVD-ROM, DVD-Video or DVD-R/-RW or DVD+R/ +RW to CD-R/RW using TOSHIBA Disc Creator. When recording to a DV-Camcorder, to ensure you capture all of your data, let the camcorder record for a few seconds before you begin recording your actual data. CD recorder, JPEG functions, DVD-Audio, mini DVD and Video CD functions are not supported in this version. Do not run software like a screen saver because it can put a heavy load on the CPU. Do not support mp3 decode and encode. User's Manual 4-25 Operating Basics 2. Before recording the video to DVD When you record DVD disc, please use only discs recommended by the Drive manufacturer. Do not set the working drive to a slow device like a USB1. 1 hard disk drive or it will fail to write DVD. Do not perform any of the following actions: Operate the computer for any other function, including using a mouse to TouchPad or closing/Opening the LCD panel. Use the Mode control button and Audio/Video control button to reproduce music or voice. Install, remove or connect external devices, including the following: ExpressCard, SD card, USB devices, external display, i. LINK. About Straight to Disc Not support to record on DVD-R/+R disc Not support to record DVD+VR format by HDV HDV support to burn DVD-Video only DVD-VR format not support to add Menu 4. About recorded DVDs Some DVD-ROM drives for personal computers or other DVD players may not be able to read DVD-R/+R/-RW/-RAM discs. [. . . ] Random Access Memory (RAM): Volatile memory that can be written to as well as read. Volatile here means that information in RAM is lost when you turn off your computer. Read Only Memory (ROM): Non-volatile memory that can be read but not written to. Non-volatile here means that information in ROM remains whether or not the computer is receiving power. [. . . ]