User manual TOSHIBA PROTEGE P2000 FIELD REPLACEABLE UNIT DOCUMENTATION
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual TOSHIBA PROTEGE P2000. We hope that this TOSHIBA PROTEGE P2000 user guide will be useful to you.
 |
Manual abstract: user guide TOSHIBA PROTEGE P2000FIELD REPLACEABLE UNIT DOCUMENTATION
Detailed instructions for use are in the User's Guide.
[. . . ] FIELD REPLACEABLE UNIT DOCUMENTATION
Portege
TM
P2000 Series
GENERAL INFORMATION
Tools Required for Proper Disassembly and Reassembly: 1. Tweezers
Before attempting any of the following procedures, make sure that the main battery and AC adaptor is not connected to the unit and the environment in which you are working on is protected from Electro-Static discharge(ESD).
Tough Enough for Today's World
TOSHIBA
FIELD REPLACEABLE UNIT DOCUMENTATION
Portege P2000 Series
TM
TABLE OF CONTENTS:
1. [. . . ] Carefully lift up the Mini PCI card interface adaptor and turn it over as shown on the next picture.
Black mini coax 3. Disconnect the black and white mini coax from the Mini PCI wireless LAN card. Spread the mini PCI connector clips and pull the wireless LAN card out of the connector about 30 degrees.
Tough Enough for Today's World.
TOSHIBA
FIELD REPLACEABLE UNIT DOCUMENTATION
Portege P2000 Series
RTC REMOVAL SPEAKER REMOVAL
TM
Glass Tape PJ10
RTC battery
RTC harness PJ790 1. Disconnect the RTC harness from PJ790 and lift it out.
Speaker Speaker harness Rubber holder 1. Lift out the speaker and separate the rubber holder.
MODEM BOARD REMOVAL
Modem board
SOUND JACK BOARD REMOVAL
Modem harness Guide pins
HDD/modem interface board M2x4 brass screws 1. Remove two M2x4 brass screws securing the modem board to the HDD/Modem interface board. Disconnect the modem board from PJ3 on the HDD/modem board Sound jack board 1. Lift up the sound jack board to free it from the guide pins and pull it out. Turn the board over as shown on the next picture.
Tough Enough for Today's World.
TOSHIBA
FIELD REPLACEABLE UNIT DOCUMENTATION
Portege P2000 Series
SOUND JACK BOARD REMOVAL
LAN harness PJ352 Sound jack cable
TM
SYSTEM BOARD REMOVAL
Sound jack board PJ999 3. Lift out the sound jack board.
Glass tape PJ35 PJ34 LCD/FLharness 1. Peel off the glass tapes securing the modem harness and the LAN harness. Disconnect the LCD/FL harness from PJ34 and PJ35 on the system board.
SYSTEM BOARD REMOVAL
M2x4 brass flat head screws PJ3 PC card slots PJ11 M2x4 brass flat head screws System board 4. [. . . ] Carefully rotate out the top of the LCD module enough to access the LCD/FL cable. . Disconnect the LCD/FL cable and lift it out.
Tough Enough for Today's World.
TOSHIBA [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE TOSHIBA PROTEGE P2000
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual TOSHIBA PROTEGE P2000 will begin.