User manual TOSHIBA PORTEGE 7200CT FIELD REPLACEABLE UNIT DOCUMENTATION

[. . . ] PCMCIA is a trademark of the Personal Computer Memory Card International Association. Intel and Pentium are registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries. Sony MiniDisc and Memory Stick are trademarks of Sony Electronics, Inc. Philips is a trademark of Koninklijke Philips Electronics N. V. PowerQuest and Drive Image are registered trademarks of PowerQuest Corporation. [. . . ] Updated drivers and/or utilities may become available after this manual is printed; see any addenda or fliers that may be included in the system packaging. Item Power Save Enabled AdHoc Channel Description Not supported. AdHoc Network: Select the same channel, 1-11, for all connected computers. If there is more than one wireless LAN nearby (such as on the same floor), we recommend that the channels for each LAN be 5 numbers apart (e. g. , if there are two other LANs nearby, the channels used should be 1, 6, and 11). Table 3: Profile Parameters Workflow The proper setup of the wireless LAN requires several steps which must be performed in the proper order. Setting parameters Setting the profile Setting the encryption 2. Network settings Setting the protocol and checking the network Setting file and printer sharing Checking the connection 5. AdHoc Network: Specify the same value for all the computers for which the encryption key is used for connection. Infrastructure Network: Specify the identical encryption keys to the encryption keys set for the access point. For instructions on how to check the encryption keys set for the access point, refer to the access point manual. If you do not specify the keys, any computer with a wireless LAN card can be connected. This presents a risk that your data may be stolen or destroyed. Setting Parameters 1. When you finish your entry, click [Apply]. Item Profile Description Enter the system file name in which the parameter information is to be saved. Enter a 13-digit value when you have selected [104 bit]* for encryption. You can use the following characters: 0 - 9, A - Z, a - z, _ (underscore). For example, to set "ABC12" for the encryption key, enter "ABC12. " Default Key Click the down arrow, and select a key from Keys 1 - 4. POINT When using ADSL (PPPoE) with the infrastructure network to connect to the Internet, you must change the computer's MTU size set. To change MTU size, refer to the manual that comes with the access point. 4. Ask your network administrator to check the setting. * 40 bit and 104 bit encryption is the wireless LAN equivalent of 64 bit and 128 bit encryption, as set by Microsoft and wireless LAN manufacturers. This is the same encryption rate that is used by the Windows XP operating system, and was selected in order to align it 56 Using the WIreless LAN Item For AdHoc Network Description Set the IP address and subnet mask: Click [Use the following IP address], and enter a value for [IP address] and [Subnet mask]. Refer to "About IP Addresses" on page 67 to set an IP address and subnet mask. 5. When a message appears prompting you to restart the computer, click [Yes]. Sharing In this section, you set sharing of the drive, folder, and printer. You only need to set this when you are sharing files or a printer with other computers on the network. [. . . ] RAM is much faster to access than ROM, however ROM contents are not lost when power is removed. Shadowing allows permanently stored information to be rapidly accessed. The optical digital audio format that allows you to download digital audio onto a MiniDisc recorder or connect to your sound system to play MP3 files with high fidelity sound. A specific technology of making RAM which does not require periodic data refreshing. [. . . ]