User manual TOSHIBA PORTEGE M750

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual TOSHIBA PORTEGE M750. We hope that this TOSHIBA PORTEGE M750 user guide will be useful to you.

TOSHIBA PORTEGE M750 : Download the complete user guide (4499 Ko)

You may also download the following manuals related to this product:

Manual abstract: user guide TOSHIBA PORTEGE M750

Detailed instructions for use are in the User's Guide.

 [. . . ] Grasp the PC card and remove it. 

Eject button

NOTE: Before removing any PCMCIA device,  make sure it is "Stopped" in the PC Card Manager. 

EXPANSION MEMORY REMOVAL

PALMREST REMOVAL
M2x6 black screws

Memory cover

M2x10 black screws

M2x4 flat head black screws 1. Push the memory clips outward and pull the memory module out of the connector on a 45 degree angle. 

1.  [. . . ] Remove the following screws: - Two M2x10 black screws - Four M2x6 black screws

Tough Enough for Today's World. 

TOSHIBA

FIELD REPLACEABLE UNIT DOCUMENTATION
Portege 3400 Series
PALMREST REMOVAL MEMBRANE SWITCH REMOVAL
Membrane switch Palm rest cover Bracket
TM

Membrane switch cable

PJ320

3. Disconnect the membrane switch cable from PJ320 and remove the palm rest cover. 

M2x3 flat head silver screws 1. Speaker ground plate

KEYBOARD REMOVAL
Keyboard AccuPoint cable PJ310 Keyboard cable

SPEAKER REMOVAL

PJ110 1. Lift out the speaker assembly and remove the speaker from the speaker holder. 

Tough Enough for Today's World. 

TOSHIBA

FIELD REPLACEABLE UNIT DOCUMENTATION
Portege 3400 Series
DISPLAY ASSEMBLY and UPPER COVER REMOVAL
Display assembly PJ300 Insulator LCD harness M2x8 black screws Make sure the insulator is tuck in under the top cover assy M2x6 black screws 1. - Three M2x8 black screws - Two M2x6 black screws M2x6 brass screws 3. Remove two M2x6 brass screws and two M2x4 brass screws securing the system board. Remove one M2x6 brass screw securing the latch hole assembly and remove the latch hole assembly. Peel off the glass tape securing the RTC battery harness and disconnect the RTC battery harness from PJ735. Lift out the system board. 

Tough Enough for Today's World. 

TOSHIBA

FIELD REPLACEABLE UNIT DOCUMENTATION
Portege 3400 Series
DISPLAY MASK REMOVAL
Latch
TM

FL INVERTER AND LCD REMOVAL

FL cable LCD cushions LCD module M2x4 Flat head brass screws FL inverter

Display mask

LCD mask seals 1. Remove two LCD cushions and two LCD mask seals using a pair of fine-tipped tweezers.  [. . . ] Remove two LCD cushions and two LCD mask seals using a pair of fine-tipped tweezers. Carefully insert your fingers between the display mask and the LCD module and pry open the display mask. 

LCD module

LCD cable

Fl inverter cable

1.  [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE TOSHIBA PORTEGE M750

Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual TOSHIBA PORTEGE M750 will begin.