User manual TOSHIBA MW24FM1

[. . . ] These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. [. . . ] If you select an unmemorized channel, the Channel indication will be red. If you select "ADD", the Channel indication changes from red to green and the channel will be memorized. If you select a memo rized channel, the Channel indica tion will be green. If you select "DEL", the Channel indication changes from green to red and the channel will be deleted from the memory. ENTER TV operation DEL CH 003 ENTER 0-9/ / /ENTER/MENU / /ENTER/MENU 3 Select the desired channel to be added or deleted using or . You can also select the channel using the Direct channel selection buttons (10 keys, 0-9). ENTER 5 Press MENU repeatedly until the MENU screen is cleared. MENU SETUP ADD CH 003 0-9/ / /ENTER/MENU 27 TV operation Setting the V-Chip An age limitation can be set to forbid children to watch programs according to "TV RATING" and "MOVIE RATING" level set. To use the V-Chip function, you must register a password. NUMBER buttons / MENU ENTER To register password To set the V-chip 1 Press MENU. Press then press ENTER. MENU or to select "TV SETUP", 1 In "V-CHIP SET" menu, press or "TV RATING", then press ENTER. ENTER to select SETUP ENTER MENU TIMER REC SET TV SETUP CH SETUP AUTO REPEAT ON OFF SYSTEM SETUP / /ENTER/MENU V-CHIP SET V-CHIP : OFF TV RATING : OFF MOVIE RATING : OFF CHANGE PASSWORD / /ENTER/MENU 2 3 1 4 7 Press or to select "V-CHIP SET" then TV SETUP press ENTER. V-CHIP SET ENTER 2 Press or to display the desired setting, then press ENTER. ENTER ON/OFF TIMER PICTURE AUDIO SURROUND ON OFF STABLE SOUND ON OFF ON OFF SAP / /ENTER/MENU V-CHIP SET V-CHIP : OFF TV RATING : TV-PG MOVIE RATING : OFF CHANGE PASSWORD DISPLAY TO SET CONTENTS / /ENTER/MENU Enter the password (4 digits) using the Number buttons (0-9), then press ENTER. 2 5 8 0 3 6 9 V-CHIP SET NEW PASSWORD: OFF : TV-Y : TV-Y7 : TV-G : TV-PG : TV-14 : TV-MA : TV RATING is not set All children 7 years old and above General Audience Parental guidance 14 years old and above 17 years old and above 0-9/ENTER/CANCEL/MENU ENTER When you select TV-Y7, TV-PG, TV-14 or TV-MA, press the DISPLAY button to explain the rating. Press the ENTER button to select the setting "ON" or "OFF". " "appears instead of the number. 4 1 4 7 Enter the same password again for safety, then press ENTER. 2 5 8 0 3 6 9 3 Press or to select the "MOVIE RATING", then press ENTER. V-CHIP SET V-CHIP : OFF TV RATING : TV-PG MOVIE RATING : OFF CHANGE PASSWORD / /ENTER/MENU V-CHIP SET CONFIRM PASSWORD: 0-9/ENTER/CANCEL/MENU ENTER V-CHIP SET menu appears. IF YOU FORGET THE PASSWORD, YOU CANNOT SET THE V-CHIP . TO AVOID FORGETTING THE PASSWORD, WRITE IT DOWN AND KEEP IN A SAFE PLACE. 28 / MENU ENTER 4 Press or to select desired rating, then press ENTER. V-CHIP SET V-CHIP : OFF TV RATING : TV-PG MOVIE RATING : PG-13 CHANGE PASSWORD / /ENTER/MENU 7 Press MENU repeatedly until the MENU screen is cleared. MENU TV operation ENTER SETUP OFF G PG PG-13 R : : : : : NC-17 : X : MOVIE RATING is not set All ages Parental guidance Parental guidance less than 13 years old Under 17 years old Parental guidance suggested 17 years old and above Adult only Note: The V-Chip function is activated only on programs and tapes that have the rating signal. When the program applied to the V-Chip setting is received, enter the password, then press the ENTER button. The settings can only be adjusted when they are displayed on the TV screen. 34 Playback (VCR) Loading and unloading a cassette tape Use only video cassette tapes marked . Loading Push the center of the tape until it is automatically inserted. Insert the cassette tape with its labeled side facing up and the erase prevention tab positioned at your left. An inverted cassette tape cannot be inserted. Erase prevention tab Automatic power ON When you insert a cassette tape the unit power will turn ON automatically. Automatic playback When loading a cassette tape without an erase prevention tab, playback will start automatically. Unloading Playback (VCR) 1 Press STOP/EJECT on the front panel. STOP/EJECT 2 Remove the cassette tape. Automatic tape eject This unit will automatically rewind the tape when the tape has ended. And when the tape is rewinded to its beginning, the cassette tape will be ejected automatically. The cassette tape can be ejected even if the POWER is "OFF". To prevent accidental erasure To prevent accidental erasure Remove the erase prevention tab with a screwdriver. Screwdriver To record again Cover the hole with a piece of adhesive tape. Erase prevention tab Adhesive tape Tape speed and maximum recording time Tape Speed SP (Standard Play) SLP (Super Long Play) Video cassette tape T-160 2-2/3 hours 8 hours T-120 2 hours 6 hours T-90 1-1/2 hours 4-1/2 hours T-60 1 hour 3 hours T-30 30 minutes 1-1/2 hours 35 Playback (VCR) Cassette tape playback To play a prerecorded tape. REV PLAY AUDIO PHONES VIDEO L/MONO R REW STOP/EJECT PLAY FF REC/OTR CHANNEL POWER REC/OTR TIMER REC OPEN/CLOSE VOLUME SKIP STOP PLAY SKIP POWER LINE IN 2 FWD STOP REW FF PLAY STOP/EJECT Playback Rewind or forward the tape Preparation: Press TV/VCR to select the TV/VCR mode. To rewind the tape: Press REW on the front panel or press REV on the remote. REW 1 Load a prerecorded tape: (When loading a cassette tape without the erase prevention tab, playback will start automatically). 2 To start playback: Press PLAY on the front panel or on the remote. " " will appear on the screen for about 4 seconds. PLAY PLAY REV To forward the tape: Press FF on the front panel or press FWD on the remote. FF FWD To stop playback: Press STOP/EJECT once on the front panel or press STOP on the remote. " " will appear on the screen for about 4 seconds. STOP/EJECT STOP To stop the tape-winding, press STOP. To switch to playback directly (without STOP), press PLAY. Forward/Reverse picture search mode When the tape is being winded, you can switch to picture search mode (see next page). The unit will resume the tape winding as soon as the button is released. Notes: If you play a prerecorded tape after the DVD playback, you must set the unit to TV/VCR mode using the TV/VCR button. [. . . ] These limited warranties extend to the original consumer purchaser or any person receiving this set as a gift from the original consumer purchaser and to no other purchaser or transferee . Limited Ninety (90) Day Warranty TACP and THI warrant this product and its parts against defects in materials or workmanship for a period of ninety (90) days after the date of original retail purchase. During this period, TACP and THI will repair a defective product or part, without charge to you. You must deliver the entire set to an Authorized TACP/THI Service Station. You pay for all transportation and insurance charges for the set to and from the Service Station. Limited One (1) Year Warranty TACP/THI further warrant the parts in this product against defects in materials or workmanship for a period of one year after the date of original retail purchase. [. . . ]