User manual TOSHIBA MW20FP3

[. . . ] Introduction DIGITAL VIDEO 2 Connections COMBINATION FLAT COLOR TELEVISION AND VIDEO CASSETTE RECORDER / DVD VIDEO PLAYER 13 Basic setup 18 TV operation 23 MW20FP3 MW24FP3 OWNER'S MANUAL Playback (VCR) 33 Recording (VCR) 38 Other functions (VCR) 42 Basic playback (DVD) 44 Advanced playback (DVD) 47 Function setup (DVD) 53 Others 57 Illustration of MW20FP3 ©2004 Toshiba Corporation This device does not tape-record copy protected DVD video discs. 5L00301C [E]Cover 1 20/4/04, 16:11 Introduction IMPORTANT SAFEGUARDS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. WARNING: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ] Press or to select option. 5 Press press or to set the desired minute, then . MENU You can also select ON/OFF TIMER by pressing PROGRAM twice. ENTER SETUP CLOCK SET ON/OFF TIMER AUTO CLOCK STANDARD TIME DAYLIGHT SAVING TIME / / / / MENU ON TIMER 12 : 00AM CH 001 SUN-SAT OFF TIMER 11 : 30PM / / / CANCEL CANCEL / ENTER / MENU ON ENTER 6 ON Press or to select "SET". Now the OFF TIMER is set. 2 Press press or . to select "ON/OFF TIMER", then ENTER ON TIMER 12 : 00AM CH 001 SUN-SAT OFF TIMER 11 : 30PM / / / CANCEL SET ENTER CLOCK SET ON/OFF TIMER AUTO CLOCK STANDARD TIME DAYLIGHT SAVING TIME / / / MENU / ENTER / MENU 7 CANCEL CANCEL Press MENU repeatedly until the menu screen is cleared. MENU 3 4 Press . or to select "OFF TIMER", then press SETUP ENTER ON TIMER 12 : 00AM CH 001 SUN-SAT OFF TIMER 12 : 00AM / / / MENU Press press or to set the desired hour, then . Notes: · To cancel the OFF TIMER function: To cancel OFF TIMER, follow above steps 1~5, then press or button to select "CANCEL". · To confirm the ON/OFF TIMER: Press the PROGRAM button twice to indicate the programs on the screen. ENTER ON TIMER 12 : 00AM CH 001 SUN-SAT OFF TIMER 11 : 00PM / / / CANCEL CANCEL / ENTER / MENU 30 5L00301C [E]p27-32 30 20/4/04, 16:14 Picture control adjustment/ Adjusting the picture preference Picture controls are factory preset but you can adjust them individually as follows: And also you can select four picture modes--Standard, Sports, Movie, and Memory--as described in the following table: CANCEL MENU ENTER Picture control adjustment Adjusting the picture preference 1 Press MENU, then press option. MENU or to select 1 Press MENU, then press option. MENU or to select SETUP LANGUAGE/ IDIOMA/LANGUE PICTURE AUDIO PICTURE PREFERENCE SETUP LANGUAGE/ IDIOMA/LANGUE PICTURE AUDIO PICTURE PREFERENCE TV operation ENTER ENTER / / / / MENU / / / / MENU 2 3 Press . or to select "PICTURE", then press 2 Press or to select "PICTURE PREFERENCE", then press . ENTER LANGUAGE/ IDIOMA/LANGUE PICTURE AUDIO PICTURE PREFERENCE ENTER LANGUAGE/ IDIOMA/LANGUE PICTURE AUDIO PICTURE PREFERENCE / / / MENU / / / MENU Press or to select the item you want to adjust, then press or to adjust the setting. 3 Press or to select the desired picture mode, then press ENTER. ENTER BRIGHTNESS CONTRAST COLOR TINT SHARPNESS 0 +32 0 0 0 ENTER PICTURE PREFERENCE STANDARD SPORTS MOVIE MEMORY / / / / CANCEL / MENU / / ENTER / MENU Selection BRIGHTNESS CONTRAST COLOR TINT SHARPNESS Pressing darker lower paler reddish softer lighter higher deeper greenish sharper Mode STANDARD SPORTS MOVIE MEMORY Picture quality Standard picture quality (factory-set) Bright and dynamic picture (factory-set) Movie-like picture setting (factory-set) Your personal preferences (set by you; see "Picture control adjustment" as left) Note: The CONTRAST default setting is set to maximum (+32) at the factory. 4 After your desired setting press MENU repeatedly until the menu screen is cleared. MENU 4 After your desired setting press MENU repeatedly until the menu screen is cleared. MENU SETUP SETUP 3 To return all adjustments to the factory preset levels Press CANCEL while making picture adjustments. 31 5L00301C [E]p27-32 31 20/4/04, 16:14 TV operation Sound control adjustment/ Stereo and Second Audio Program (SAP) Sound controls are factory preset but you can adjust them individually as follows: The unit is equipped with a feature known as multi-channel TV sound or MTS. MTS broadcasts greatly enhance TV viewing by bringing you programs with high fidelity stereo sound. MTS also provides an extra channel called the Second Audio Program or SAP which broadcasters can use to transmit a second language for bilingual transmission or for other purposes. AUDIO SELECT CANCEL MENU Sound control adjustment Listening to stereo sound When the TV is turned on or a channel selection is made, make certain the "STEREO" appears on the screen. · When mono broadcasting is received, no indication is displayed. · If the broadcast signal is not strong enough or clear stereo sound is not available, press AUDIO SELECT to change to mono sound. Press it again to return to the stereo sound. CH 013 STEREO 1 2 3 Press MENU, then press option. or to select MENU ENTER LANGUAGE/ IDIOMA/LANGUE PICTURE AUDIO PICTURE PREFERENCE SETUP / / / / MENU Press or to select "AUDIO", then press . ENTER LANGUAGE/ IDIOMA/LANGUE PICTURE AUDIO PICTURE PREFERENCE / / / MENU Press or to select the item you want to or to adjust the adjust, then press setting. ENTER Listening to SAP (Second Audio Program) When the TV is turned on or a channel selection is made, make certain the SAP appears on the screen. This means that the Second Audio Program broadcasting is available. CH 013 STEREO SAP BASSCONTRAST TREBLE BALANCE SURROUND STABLE SOUND SAP / / / 0 0 0 OFF OFF OFF / CANCEL / MENU Press or to adjust the bass sound. ON: The dynamic presence and sound created offers a thoroughly enjoyable listening experience. STABLE SOUND : Press ON: The Stable Sound feature limits the highest volume level to prevent extreme changes in volume when the signal source is changed. OFF: SAP is not available. BASS: TREBLE: BALANCE: To select desired sound Press AUDIO SELECT to select the desired sound. AUDIO SELECT STEREO Broadcast MONO STEREO MONO+SAP STEREO+SAP 4 32 After your desired setting press MENU repeatedly until the menu screen is cleared. MENU SETUP 3 To return BASS/TREBLE/BALANCE control adjustments to the factory preset levels Press CANCEL while making sound adjustments. SAP setting OFF ON OFF ON OFF ON OFF ON Audio display MONO MONO STEREO MONO STEREO MONO MONO SAP STEREO MONO SAP 5L00301C [E]p27-32 32 20/4/04, 16:14 Playback (VCR) Loading and unloading a cassette tape Use only video cassette tapes marked . Loading Push the center of the tape until it is automatically inserted. Insert the cassette tape with its labeled side facing up and the erase prevention tab positioned at your left. An inverted cassette tape cannot be inserted. Erase prevention tab Automatic power ON When you insert a cassette tape the unit power will turn ON automatically. Automatic playback When loading a cassette tape without an erase prevention tab, playback will start automatically. Unloading Playback (VCR) 1 Press STOP/EJECT on the front panel. 2 Remove the cassette tape. Automatic tape eject This unit will automatically rewind the tape when the tape has ended. And when the tape is rewinded to its beginning, the cassette tape will be ejected automatically. · The cassette tape can be ejected even if the POWER is "OFF". To prevent accidental erasure To prevent accidental erasure Remove the erase prevention tab with a screwdriver. Screwdriver To record again Cover the hole with a piece of adhesive tape. Erase prevention tab Adhesive tape Tape speed and maximum recording time Tape Speed SP (Standard Play) SLP (Super Long Play) Video cassette tape T-160 2-2/3 hours 8 hours T-120 2 hours 6 hours T-90 1-1/2 hours 4-1/2 hours T-60 1 hour 3 hours T-30 30 minutes 1-1/2 hours 33 5L00301C [E]p33-37 33 20/4/04, 16:14 Playback (VCR) TV/VCR Cassette tape playback To play a prerecorded tape. REV PLAY FWD STOP REW FF Illustration of MW20FP3 PLAY STOP/EJECT Playback Rewind or forward the tape Stop the playback or recording with STOP. To rewind the tape: Press REW on the front panel or press REV on the remote. 1 Load a prerecorded tape: (When loading a cassette tape without the erase prevention tab, playback will start automatically). REV 2 To start playback: Press PLAY on the front panel or on the remote. " " will appear on the screen for about 4 seconds. To forward the tape: Press FF on the front panel or press FWD on the remote. PLAY FWD To stop playback: Press STOP/EJECT once on the front panel or press STOP on the remote. " will appear on the screen for " about 4 seconds. To stop the tape-winding, press STOP. To switch to playback directly (without STOP), press PLAY. Forward/Reverse picture search mode When the tape is being winded, you can switch to picture search mode (see next page). The unit will resume the tape winding as soon as the button is released. STOP Notes: · If you play a prerecorded tape after the DVD playback, you must set the unit to TV/VCR mode using the TV/VCR button. [. . . ] You must also deliver the entire product to a TACP Authorized Service Station. You are responsible for all transportation for the set to and from the Service Station. Limited Two (2) Year Warranty of Picture Tube TACP further warrants the picture tube in this product against defects in materials or workmanship for a period of two (2) years after the date of original retail purchase. During this period, TACP will replace a defective picture tube without charge to you except that if a defective picture tube is replaced after ninety (90) days from the date of the original retail purchase, you pay labor charges involved in the replacement. You are responsible for all transportation and insurance charges for the set to and from the Service Station. Rental Units The warranty for rental units begins with the first rental or thirty (30) days from the date of shipment to the rental firm, whichever comes first. Commercial Units Products sold and used for commercial use have a limited ninety (90) day warranty for all parts, labor and picture tube. Owner's Manual and Demographic Card You should read this owner's manual thoroughly before operating this product. [. . . ]