User manual TOSHIBA MMY-MAP1604HT8-E DATA BOOK

[. . . ] ۲ ܿ ޱ --- - ͫ ӱ ӫ ͧ- ګ - - Notice: Toshiba is committed to continuously improving its products to ensure the highest quality and reliability standard, and to meet local regulations and market requirements. ܿ Contents 1 2 3 4 Foreword . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Safety caution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1 System overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1 4-1. OUTLINE OF TOSHIBA SMMS (Super Modular Multi System). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SUMMARY OF SYSTEM EQUIPMENTS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . List of product and combined model name. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Weekly timer mode Wired remote controller Wired remote controller with weekly timer Simple wired remote controller Wireless remote controller kit Schedule timer mode ݱ - Schedule timer mode and Weekly timer mode Indoor unit TCC-LINK Central remote controller Schedule timer Indoor unit SW setting at schedule timer is necessary. Wired remote controller Schedule timer Wired remote controller Central remote controller Schedule timer 10 -2 10 Controls ߰ ޿- ػ ͧ- ӱ Central remote controller ON-OFF controller ѫ Է ײ Ʊ ػ ײ ѫ Է ײ Ʊ Ʊ ػ ײ ѫ Է ײ Ʊ ײ б ݻ - ͷ - Central management controllers for 64/128 units ګ Individual control up to 64 indoor units Individual control for max. 64 indoor units divided in to 4 zones (Up to 16 indoor units for each zone) Up to 16 outdoor header units are connectable. Setting for one of 1 to 4 zones is available. Individual control of up to (64 indoor units)*2 TCC-LINK buses Individual control of up to (64 indoor units divided 1 to 64 zone)*2 TCC-LINK buses (Up to 64 indoor units for each zone) Up to 16 outdoor header units are connectable per 1 TCC-LINK bus Setting for (one of 1 to 64 zones)*2ch is available. Return back setting ײ Wired remote controller Wired remote controller with weekly timer Simple wired remote controller Wireless remote controller kit ݱ Usable with other central control devices (Up to 10 central control devices in one control circuit) Central control 4 mode 4 selectable settings to restrict individual operation of remote controller. Two selectable mode Central controller mode/Remote controller mode Master/Sub setting possible 10 -3 10 Controls ޿- ͧ- ӱ Central remote controller ON-OFF controller + Schedule timer ײ Wired remote controller Wired remote controller with weekly timer Simple wired remote controller Wireless remote controller kit Central remote controller ON-OFF controller ײ Wired remote controller Wired remote controller with weekly timer Wireless remote controller kit ѫ ײ Central remote controller + Schedule timer Weekly operation schedule can be set by connecting a schedule timer to the central remote controller ײ ͷ - б - ͽ ݻ б U3, U4 Outdoor unit U1, U2 Power supply Single phase 220/230/240V Indoor unit Central remote controller Even when grouping operation is performed by connecting multiple indoor units to 1 line, the indoor remote controller is required. Example of grouping operation U3, U4 Outdoor unit U1, U2 Either one of the two controllers can be set as side control without indoor remote controller. Power supply Single phase 220/230/240V (Group) Indoor remote controller is required Central remote controller ߪ U3, U4 Outdoor unit U1, U2 Power supply Single phase 220/230/240 (Group) ߪ Central remote controller 10 -4 10 Controls ޿- ͧ- ӱ Central remote controller ON-OFF controller ``1 : 1 model'' connection interface High-wall type for SDI/DI is not necessary this. 4-way and compact 4-way cassette type for SDI/DI need the metal fitting kit (TCB-PX30MUE). ײ Wired remote controller Wired remote controller with weekly timer Simple wired remote controller Wireless remote controller kit Power supply Single phase 220/230/240V U3, U4 Central remote controller Header unit ͫ "1 : 1 m o de l" co nn ec tion int erfa ce U1, U2 Indoor unit Central management control with ``1 : 1 model'' Indoor remote controller * TOSHIBA Digital Inverter System and Super Digital Inverter System 10 -5 10 Controls ߰ - ӱ ߰ ګ б 󽫬 ݱ Ы Է -- - - ڻ The upper limit capacity of the outdoor unit is restricted based on the outdoor power peak selected setting. ګ Two control settings are selectable by setting SW07 on the interface P. C. board on the header outdoor unit. Size : 71 x 85 (mm) Ա ͫ ߰ ͬ SW07-2 OFF Input SW01 ON OFF SW02 OFF ON SW07-1 OFF ON 0% (stop) Up to 60% 100% (Normal) 100% (Normal) By cutting J16 on the I/F B. C. board, the operation above becomes possible only with the signal from SW1. ߼ SW07-2 ON Input SW01 OFF ON OFF ON SW02 OFF OFF ON ON SW07-1 OFF ON 100% (Normal) 100% (Normal) Up to 80% Up to 85% Up to 60% Up to 75% 0% (stop) Up to 60% Ensure that terminal contacts are fixed and secure. Do not turn on SW1 and SW2 terminals simultaneously. 10 -6 10 Controls ӱ ߰ ګ Ͳ Ы ڻ Outdoor fan is operated from the snowfall signal received from the outside. ڻ Ա ͫ Size : 55. 5 x 60 (mm) ݱ ߰ Terminal Input signal Operation Snowfall fan control (Operates outdoor fan. ) SMC * Install the optional P. C. Normal operation (Releases control) This control is activated when a input signal increases or decreases. (The increasing or decreasing signal needs to be held for a minimum of 100msec in order to activate the control). ۨ - ۨ ڻ The outdoor unit starts or stops the system. ڻ ݱ ػ Ա ͫ SMC : Input signal for start SMH : Input signal for stop Terminal SMC Input signal Operation Starts all indoor units. SMH Stops all indoor units. Ensure that terminal contacts are fixed and secure. This control is activated when a input signal increases or decreases. (The increasing or decreasing signal needs to be held for a minimum of 100msec in order to activate the control). 10 -7 10 Controls ӱ ߰ ګ ҷ ͱ Ы λ ڻ Sound level can be reduced by restricting the compressor and fan speeds. ڻ Ա ͫ Size : 55. 5 x 60 (mm) ݱ ߰ Terminal Input signal Operation Night operation (sound reduction) control SMC Normal Operation * Install the optional P. C. board in the inverter assembly of the outdoor header unit. This control is activated when a input signal increases or decreases. (The increasing or decreasing signal needs to be held for a minimum of 100msec in order to activate the control). Night operation sound reduction dB(A) 53 53 50 50 50 50 50 Capacity COOL HEAT Approx. 80% 1604 type 1404 type 1204 type 1004 type 0804 type 0601 type 0501 type Condition Cooling : (Indoor 27deg DB, 19deg WB) (Outdoor temperature 25deg DB) Heating : (Indoor 20 deg DB) (Outdoor temperature 7deg DB, 6 deg WB) 10 -8 10 Controls ӱ ߰ ګ Ѱ - Ы Է ڻ This control can restrict the selectable operation mode. ګ Ա ͫ Size : 55. 5 x 60 (mm) ݱ ػ ߰ SMC : Cooling mode designated input switch SMH : Heating mode designated input switch SMC ON OFF SMH OFF ON Selected operation mode Only cooling mode permitted Only heating mode permitted Ensure terminal contacts are securely fixed. [. . . ] Normally, the values meausured in the actual operating environment become large than the indicated values due to the effects of external sound. Note 3: * When supply air temperature is "setting temperature + 3C" or less, Fresh Air Intake unit operates as FAN mode. * When supply air temperature is 19C or less, Fresh Air Intake Indoor unit operates as FAN mode. Note 4: * When supply air temperature is "setting temperature - 3C" or over, Fresh Air Intake unit operates as FAN d Note 1: Rated conditions 11 -253 11 Technical Specifications ܷ-ڮ- ߷ ײ ײ ˲ ̧ Long hole for M10 hanging bolt Type Hole dia. -Wideth x Length 0481 4- 12 x 40 0721, 0961 4- 12 x 92 1328 1288 (Hanging bolt pitch) 1262 X Space necessary for service Service space Fresh air intake unit Service space Check port (600 ) Filter direction 600 Drain piping work example at local site Refrigerative piping work example at local site Check port X C D E F Drain port Refrigerant pipe (When drain-up kit is mounted) connecting port Electric parts box (With cover) For vinyl chloride pipes (Gas side M) (Nominal dia 25 : Inner dia 32) Filter chamber Drain piping work High-performance Refrigerant piping work Refrigerant pipe example at local site connecting port filter example at local site (Liquid pipe N) Pre-filter Z Blow-off port Discharge temp sensor Discharge port connecting flange (K) (Accessory for main unit of product) 23 60 (205) (250) 704 850 1262 292 Drain port (R1) (Main uint of product) G H I J G H I J A Z View Pre-filter Suction port Suction port connecting flange (L) (Accessory for main unit of product) X - X detail diagram AP0961HFE AP0721HFE AP0481HFE Model MMD- 1392 1260 1392 1260 892 810 A B 250 250 250 250 250 250 215 107. 5 107. 5 C D E 250 250 215 F 250 250 G 250 250 250 H 250 250 250 I 250 10-M6 250 10-M6 8-M6 J K 10-M6 10-M6 6-M6 L 22. 2 brazing 22. 2 brazing 15. 9 flare M 12. 7 flare 12. 7 flare 9. 5 flare N 11 -254 11 Technical Specifications Work example Filter chamber Pre-filter Canvas duct High-performance filter Canvas duct Fresh air intake unit Air intake duct Check port Ceiling Outside air ײ- ұ 1 2 The check port should be 600 x 600mm. [. . . ]