User manual TOSHIBA MD13N1R

[. . . ] COMBINATION COLOR TELEVISION AND DVD/CD PLAYER Owner's Manual MD13N1/R MD19N1/R DIGITAL VIDEO ATTENTION For your protection in the event of theft or loss of this product, please fill in the information listed below which is for your own personal records. Place of Purchase : : : TV/CATV MODE SELECTION When shipped from the factory, the TV/CATV menu option is set to the "CATV"(Cable Television) mode. If not using CATV, set this menu option to the "TV" position. Before operating the unit, please read this manual thoroughly. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. [. . . ] Now settings were set into the memory. < V-CHIP SET V-CHIP TV RATING MOVIE RATING CHANGE PASSWORD : ON : TV-Y : PG-13 / / / /MENU > 20 Press 7 screenMENU until the MENU is cleared. TO CHANGE PASSWORD Press 1 screenMENU in the TV mode. until OPTION menu V-CHIP SET LANGUAGE/IDIOMA/LANGUE RECALL TV/DVD POWER < or select 3 Press SET", thentopress the "V- . CHIP or / / / /MENU > INPUT SELECT 1 4 7 SLEEP 2 5 8 0 3 GAME 6 OPEN/CLOSE 9 CLOSED CAPTION V-CHIP SET LANGUAGE/IDIOMA/LANGUE MUTE TOP MENU SUBTITLE AUDIO ANGLE < Password using Direct 4 Enter the Selection (0-9), then Channel / / / /MENU > SETUP/MENU DVD MENU CANCEL ZOOM/CH RTN CH + VOL RETURN VOL + ENTER press ENTER. If you put a wrong number, press CANCEL. V-CHIP SET PASSWORD : <0 CH 9/ENTER/CANCEL/MENU > REV PLAY FWD PLAY MODE to select 5 Press orPASSWORD", then "CHANGE press or . V-CHIP SET V-CHIP TV RATING MOVIE RATING CHANGE PASSWORD : OFF : OFF : OFF SKIP STOP SKIP JUMP SLOW PAUSE SLOW REPEAT AB < / / / /MENU > 6 Enter the new password using Direct Channel Selection (0-9), then press ENTER. V-CHIP SET V-CHIP TV RATING MOVIE RATING CHANGE PASSWORD NEW PASSWORD : : OFF : OFF : OFF <0 9/ENTER/CANCEL/MENU > password again 7 Enter the samepress ENTER. for safety, then V-CHIP SET V-CHIP TV RATING MOVIE RATING CHANGE PASSWORD CONFIRM PASSWORD : : OFF : OFF : OFF <0 9/ENTER/CANCEL/MENU > 8 Press MENU repeatedly to return to normal screen. 21 Picture control adjustment Picture controls are factory preset but you can adjust them individually as follows: Press MENU 1 appear. The TV menu screen will RECALL TV/DVD POWER or 2 Press appears. until PICTURE menu BRIGHTNESS CONTRAST COLOR TINT SHARPNESS 0 +32 0 0 0 INPUT SELECT 1 4 7 SLEEP 2 5 8 0 3 GAME 6 OPEN/CLOSE < MUTE / / / /MENU > 9 CLOSED CAPTION Press or to 3 you want to adjust. select the item BRIGHTNESS CONTRAST COLOR TINT SHARPNESS 0 +32 0 0 0 TOP MENU SUBTITLE AUDIO ANGLE SETUP/MENU DVD MENU CANCEL ZOOM/CH RTN < CH + / / / /CANCEL/MENU > 4 Press VOL + ENTER or to adjust the setting. VOL RETURN CH Selection BRIGHTNESS CONTRAST COLOR TINT SHARPNESS Pressing darker lower paler reddish softer lighter higher deeper greenish sharper REV PLAY FWD PLAY MODE SKIP STOP SKIP JUMP SLOW PAUSE SLOW REPEAT AB 5 After your desired setting press MENU until the MENU screen is cleared. CANCEL Pressing CANCEL while making picture adjustments will return all adjustments to the factory preset levels. NOTE: The CONTRAST default setting is set to maximum at the factory. 22 Stereo and Second Audio Program (SAP) The TV/DVD is equipped with a feature known as Multi-channel TV Sound or MTS. MTS broadcasts greatly enhance TV viewing by bringing you programs with high fidelity stereo sound. MTS also provides an extra channel called the Second Audio Program or SAP which broadcasters can use to transmit a second language for bilingual transmission or for other purposes. LISTENING TO STEREO SOUND When the TV is turned on or a channel selection is made, make certain the STEREO appears on the screen. When "Mono" broadcasting is received, no indication is displayed. If the broadcast signal is not strong enough or clear stereo sound is not available, press AUDIO to change to mono sound. Press it again to return to the stereo sound. STEREO CH 013 RECALL TV/DVD POWER INPUT SELECT 1 4 7 SLEEP 2 5 8 0 3 GAME 6 OPEN/CLOSE 9 CLOSED CAPTION MUTE TOP MENU SUBTITLE AUDIO ANGLE SETUP/MENU DVD MENU CANCEL ZOOM/CH RTN CH + VOL RETURN VOL + ENTER LISTENING TO SAP (SECOND AUDIO PROGRAM) When the TV is turned on or a channel selection is made, make certain the SAP appears on the screen. This means that the "Second Audio Program" broadcasting is available. STEREO SAP CH 013 CH REV PLAY FWD PLAY MODE SKIP STOP SKIP JUMP SLOW PAUSE SLOW REPEAT AB TO SELECT DESIRED SOUND Press AUDIO to select the desired sound. SEL. STEREO MONO+SAP BROADCASTING MONO SOUND (MAIN) SAP SOUND MONO + SAP SOUND (MONO) STEREO+SAP BROADCASTING STEREO SOUND (MAIN) SAP SOUND MONO SOUND (MAIN) MONO + SAP SOUND (MAIN) 23 Disc About this owner's manual This owner's manual explains the basic instructions of this TV/DVD. Some DVD video discs are produced in a manner that allows specific or limited operation during playback. A " " means that the operation is not permitted by the TV/DVD or the disc at the moment. For example, it is unable to stop the playback of copyright message of the disc when the STOP ( ) button is pressed. Alternatively, the " " may also indicate that the feature is not available for the disc. Playable discs This TV/DVD can play the following discs. Disc Mark Contents Disc Size Maximum playback time Approx. 4 hours (single sided disc) 12 cm Audio + video (moving pictures) 8 cm Approx. 80 minutes (single sided disc) DVD video discs Notes on region numbers The region number of this TV/DVD is 1. If region numbers, which stand for their playable area, are printed on your DVD video disc and you do not find 1 or ALL , disc playback will not be allowed by the player. [. . . ] During this period TACP/THI will replace a defective part without charge to you, except that if a defective part is replaced after ninety (90) days from the date of original retail purchase you pay labor charges involved in the replacement. You must also deliver the entire product to a TACP/THI Authorized Service Station. You are responsible for all transportation for the set to and from the Service Station. Limited Two (2) Year Warranty of Picture Tube TACP and THI further warrant the picture tube in this product against defects in materials or workmanship for a period of two (2) years after the date of original retail purchase. During this period, TACP/THI will replace a defective picture tube without charge to you except that if a defective picture tube is replaced after ninety (90) days from the date of the original retail purchase, you pay labor charges involved in the replacement. [. . . ]