User manual TOSHIBA M63

[. . . ] To ensure proper use of this product, please read this owner's manual carefully and retain for future reference. Should the unit require maintenance, contact an authorized service location. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. To prevent direct exposure to laser beam, do not try to open the enclosure. [. . . ] DVD Information display e. g. 1) Press DISPLAY while a disc is playing, the first banner shows the title, chapter information and the elapsed time display of the current chapter. 2) Press DISPLAY again for Audio language, Subtitles and Camera angle information. 3) Press DISPLAY a third time for the remaining time display of the current chapter. 4) Press DISPLAY a fourth time for the elapsed time display of the current chapter. 5) Press DISPLAY a fifth time for the remaining time display of the current title. 6) To turn off the display, press DISPLAY again. Title Chapter Elapsed time of the current chapter CD Information display e. g. Track Repeat Off Elapsed time of the current track CDDA TR K Track X Repeat Off Remaining time of the current track CDDA TR K Track X Repeat Off Elapsed time of the played track CDDA TR K Track X Repeat Off Remaining time of the current disc DVD TT Audio language CH Subtitles Camera angle CDDA TR K X 40 1/3 ENG Title D 6CH Chapter ENG 1/1 27. MENU button Display the menu of DVD. 28. NAVI button (DVD/VCD) Press this button to display and access features and settings. For VCD 2. 0, PBC must be On in order to return to the menu when RETURN is pressed. A-B RPT button Set the beginning and end points of a section to repeat. · You cannot set the A-B repeat function for a segment that includes multiple camera angles. · You can specify a segment only within the current title or track (VIDEO CD). · The HDMI connector outputs uncompressed digital video, as well as almost every kind of digital audio that the player is compatible with, including DVD-Video, Video CD/Super VCD, CD, MP3 and DivX®. · This unit has been designed to be compliant with HDMI (High Definition Multimedia Interface) depending on the component you have connected. · Because HDMI is an evolving technology, it is possible that some devices with an HDMI input may not operate properly with this DVD player. · When using HDMI cable, do not connect to other analog video outputs. · HDMI output is only available when the Video out is set to "HDMI". Otherwise the HDMI button is invalid. 16 Content of the output for each output jack is shown in the following table and differ depending on the On-Screen Display Setting: On-Screen Display Setting "Video" Setting RGB HDMI Output Setting Invalid 576p/480p HDMI 720p 1080i 1080p Content of output for each output jack HDMI Output 576p/480p 720p 1080i 1080p Video Output Composite Composite Composite Composite Composite AV Output RGB Composite Composite Composite Connections Composite * Settings for HDMI output format are performed using the HDMI button on the remote control or HDMI SELECT button on the front panel. Note · If Auto is selected, it follows preference HDMI aspect ratio of TV. Connecting to Optional Equipment You can enjoy high quality dynamic sounds by connecting the DVD player to optional audio equipment. · For connection to your TV, see "Connecting to a TV" . · This section uses the following reference marks. : Front speaker : Rear speaker : Sub woofer : Center speaker : Signal flow Warning · When you are connecting (via the COAXIAL DIGITAL AUDIO OUT jack) an AV decoder that does not have Dolby Digital, DTS® or MPEG2 decoding function, be sure to set "Digital out" to "PCM" from the on-screen displays. Otherwise, high volume sound may damage your hearing as well as the speakers. · When playing DTS-encoded discs (DVDs and audio CDs), excessive noise may be output from the analog audio output jacks. To avoid possible damage to the audio system, you should take proper precautions when the analog audio output jacks of the DVD player are connected to an amplification system. [. . . ] A playback picture may be distorted when detected a signal change between PAL and NTSC on the disc. For the case of Progressive mode, your multisystem TV must be able to support 525p and 625p. OK CANCEL For more information, please visit http://vod. divx. com If you want to continue with registration, please select "OK" then press "ENTER" on the remote control. 26 Others Before Calling Service Personnel Check the following guide for the possible cause of a problem before contacting service. Symptoms and correction Symptom No power. · The equipment connected with the audio cable is not set to receive DVD signal output. Correction · Connect the power plug securely into the wall outlet. [. . . ]