User manual TOSHIBA FT8981

[. . . ] Preparation Basics Caller ID/Call waiting Answering System Additional Information GETTING STARTED: DO THIS FIRST! FIRST, CHARGE THE HANDSET BATTERY!· Set your new phone in an out-of-the-way place near a power outlet where it will not be disturbed. · Plug the AC adaptor cord into the power jack on the base unit. · Take the cover off the handset battery compartment; plug the battery connector into the receptacle inside the battery compartment and replace the cover. [. . . ] The caller ID memory retains a listing of the 20 most recent callers. 1 Pick up the handset and press If there is new caller ID data: CID . If new caller ID data does not exist: Total:02 New :01 Total:02 2 Press Caller ID/Call waiting to display the latest incoming call. to see previous incoming call. CID Press 1/7 9:30AM 12 DOE JOHN 555-2563 3 Press to return to standby mode. CALLING BACK FROM THE CALLER ID LIST 1 Pick up the handset and press press or wish to call. CID . Then, to display the number you 1/7 9:30AM 12 SMITH JOHN 456-7890 2 Press TALK . The displayed number will be dialed. TALK 4567890 NOTE: To enter a number for a long distance call, see "EDITING CALLER ID DATA" page 29. It is not necessary to add a "1" when dialing some area codes. If in doubt, check your local telephone directory. 28 CALLER ID/CALL WAITING EDITING CALLER ID DATA You can edit the Caller ID data. 1 Pick up the handset and press 2 Press L. D. /1 CID . Then, press or repeatedly to display the Caller ID data you want to edit. for a long distance call prefix "1" and for area code setting and cancellation. 1/7 9:30AM 12 Ted Doe 456-7890 L. D. /1 LOCAL/3 LOCAL/3 key 1/7 9:30AM 12 Ted Doe 123-456-7890 L. D. /1 key key Caller ID/Call waiting 1/7 9:30AM 12 Ted Doe 1-456-7890 LOCAL/3 NOTE: Before you use LOCAL/3 for area code setting and cancellation, make sure the AREA CODE is set. (See page 16) key 1/7 9:30AM 12 Ted Doe 1-123-456-7890 3After editing Caller ID data, you can make the call or store procedures. To make a call, press TALK . To store into memory dial, press MEM . Then, select memory location with or and press SELECT . TRANSFERING CID NUMBER TO SPEED-DIAL MEMORY 1 Pick up the handset and press 2 Press . Then, press or to indicate the number you want to store the memory. , to Select Location s 1s 2 select memory location. 29 CALLER ID/CALL WAITING 4 Press . A confirmation tone sounds and the Caller ID data SELECT is stored. Press CID to return to standby. If you select a memory location which is already stored: Press to select and press SELECT . A confirmation tone sounds and the new data overwrites the old data. Yes sNo If you select : The LCD returns to the Caller ID display screen. Press CID to return to standby mode. DELETING CALLER ID DATA Caller ID/Call waiting DELETE INDIVIDUAL CALLER ID DATA: 1 Pick up the handset and press 2 Press Press DELETE CID . Then, press or to display the caller ID number you want to delete from the memory. . If you select , you hear a confirmation tone and the LCD displays the next caller ID data. If there is none, the LCD displays the number of calls. If you select , the LCD returns to the Call ID display screen. 4 Press CID to return to standby. 30 CALLER ID/CALL WAITING DELETE ALL CALLER ID DATA: 1 Press 2 Press Press CID . New :01 Total:02 DELETE . Yes sNo 3 Press . If you select , a confirmation tone sounds and the LCD displays "Total:00". If you select , the LCD displays the number of Caller ID calls. Total:00 4 Press New :01 Total:02 CID to return to the standby mode. Caller ID/Call waiting CALL WAITING The LCD will show another incoming call even if you are on the line. If enabled, you hear the short beeps at regular intervals until the call is either answered, or the person calling hangs up. With Caller ID on call waiting, you can see who is calling to decide if you want to interrupt your current conversation to answer the incoming call. WITH CALLER ID SERVICE 1 Before answering a call, check to see that the caller's name and 2 To switch back to the first caller, press FLASH telephone number are displayed on the screen. again. NOTE: Pressing FLASH without having received a Call Waiting signal may disconnect the current line. 31 USING THE MENU MODE Menu mode allows you to set the following Answering System functions. [. . . ] Some party line services require a special adaptor or modification to your telephone. It should be noted that some cordless telephones operate at frequencies that may cause interference to nearby TVs and VCRs; to minimize or prevent such interference, the base of the cordless telephone should not be placed near or on top of a TV or VCR; and, if interference is experienced, moving the cordless telephone farther away from the TV or VCR will often reduce or eliminate the interference. Additional Information 46 WARRANTY/SERVICE TELEPHONE/TELEPHONE ANSWER MACHINE LIMITED WARRANTY Toshiba America Consumer Products. Inc("TACP") and Toshiba Hawaii, Inc. ("THI") make the following limited warranties. These limited warranties extend to the original consumer purchaser or any person receiving this set as a gift from the original consumer purchaser and to no other purchaser or transferee. Limited One(1) Year Warranty of Labor and parts TACP/THI warrant this product and its parts against defects in materials or workmanship for a period of one(1) year after the date of original retail purchase. During this period, TACP/THI will repair or replace your defective product with a new or refurbished unit at our option. Owner's Manual You should read the owner's manual thoroughly before operating this product. Your Responsibility The above warranties are subject to the following conditions. [. . . ]