User manual TOSHIBA FS-3600 PC WORKSTATION

[. . . ] PCWS FS-3600 PC WorkStation Owner's Manual TEC America, Inc. FS-3600 PC Work Station TEC AMERICA, INC. 90-DAY LIMITED WARRANTY FS-3600 PC WORK STATION SOFTWARE Warranty BEFORE USING THIS PRODUCT, YOU SHOULD CAREFULLY READ THE FOLLOWING TERMS AND CONDITIONS. IF YOU DO NOT AGREE WITH THEM, YOU SHOULD NOT USE THIS PRODUCT AND SHOULD PROMPTLY RETURN THE PRODUCT TO THE SELLER. warrants this product to be free from defects in materials and workmanship for a period of 90 days from the date of purchase from an authorized TEC AMERICA, INC. [. . . ] · Enter the number of minutes that a station can be idle in POS mode before the system should automatically log the operator out of the system. · This security features helps prevent unauthorized access to the system because an operator left a station unattended without first logging out of the system. · This flag signals to maintain and report the non-resettable grand totals for balancing and security purposes. · The NRGT is the OPENING and CLOSING numbers of the Financial report. · This flag allows the system totals to be reset if there are any open checks in the system. · If this flag is not set, the system totals cannot be cleared with open checks. Check Box (Toggle Checked for Yes or Un-Checked for No) Check Box (Toggle Checked for Yes or Un-Checked for No) Mgr AutoLogout 2 Digit Numeric POS AutoLogout 2 Digit Numeric Use NRGT Check Box (Toggle Checked for Yes or Un-Checked for No) Check Box (Toggle Checked for Yes or Un-Checked for No) Z w/open Chks - 81 - POS Configuration Field Name Cut After Rpt Description FS-3600 PC Work Station Entry Type Check Box (Toggle Checked for Yes or Un-Checked for No) PTD Totals Rpt Closed Chks Restrict Stn Z Rpt Svr Sales Blind Deposits · If this flag is set, the system will send a cut command to the report printers after printing a report. · When printing an auto-sequence report like an X Report or a Z Report, the system will only cut the report when it has completed the autosequence. · Set this flag to enable period-to-date system totals tracking. · If this flag is set, the system will update the PTD totals each time the daily totals are reset. · If Period-To-Date totals are not used, turn this option off to save system resources. · Another selection is made from System Reports on the Reports Menu. · The new selection will prompt to select between Daily Reports and Period Reports. · Set this flag to print a closed check summary on the System Financial Report. · Set this flag to restrict the Z Report from being run on stations that do not have the Allow Z Report flag enabled in the Station Table. · Set this flag to include a summary of sales by server section on the System Financial Report. · Set this flag to suppress the Total Due field on the deposit screen and to suppress the over/ short confirmation when exiting the deposit screen. · Available options are Whole Hour, Half Hour, and Quarter Hour. Check Box (Toggle Checked for Yes or Un-Checked for No) Check Box (Toggle Checked for Yes or Un-Checked for No) Check Box (Toggle Checked for Yes or Un-Checked for No) Check Box (Toggle Checked for Yes or Un-Checked for No) Check Box (Toggle Checked for Yes or Un-Checked for No) Pick List: Options are: Whole, Half, and Quarter Check Box (Toggle Checked for Yes or Un-Checked for No) Hour Part No Sale Req ID Clr After Tndr · This flag is used to signal to prompt for an ID before opening the drawer when the No Sale key is pressed. · If this flag is set to No, then the drawer will immediately open. · This flag signals to clear the change information Check Box (Toggle immediately after tendering a transaction. Checked for Yes or Un-Checked for No) - 82 - FS-3600 PC Work Station Network/Colors POS Configuration Field Name Sub-Network WD Timeout Description · Enter the ID number of the network for the system. · Enter the number of seconds that the system 2 Digit Numeric should use to monitor a station's network activity. · If a packet is not received from a station within the number of seconds in this field, the station is disconnected from the network. [. . . ] Weekly System Z: If the current day is the Week Ending Day, the Weekly System Z Report is checked by default and the Daily Z is checked and grayed out. The Daily Labor Z must be checked selected to run the Daily Labor Close. Weekly Labor Z: If the current day is the Week Ending Day the Weekly Labor Z is checked by default and the Daily Z selection is checked and grayed out. CAUTION: On Week Ending Days, remember to uncheck Close Labor if only a Sales Z is desired. [. . . ]