User manual TOSHIBA DVR15

[. . . ] VR15SB-1-eng 5/6/05 9:44 AM Page 1 DVD RECORDER & VCR D-VR15SB OWNER'S MANUAL Read this booklet first. C 2005 Toshiba Corporation PAL VR15SB-1-eng 5/6/05 9:44 AM Page 2 Warning Getting Started TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. IMPORTANT NOTE The mains lead on this equipment is supplied with a moulded plug incorporating a fuse. If it requires replacing, a fuse approved to BS1362 of the same rating must be used. Never use the plug with the fuse cover omitted if the cover is detachable. [. . . ] · If you press the PREVIOUS SKIP (loeoe) button after playing the marked point for longer than 3 seconds, playback will start from the beginning of the current marked point. To start playback from previous marked point, press PREVIOUS SKIP (loeoe) button again. MOVE PLAY CANCEL RETURN Clearing a Marker Press the MARKER button during playback. 3 4 Press the oe button to move to the next position. Press the OK button again when the desired scene appears. Marker 01 02 N:2 1 2 Press the oe buttons to select a marked scene. Press the CLEAR button to delete the selected mark. Marker 01 02 03 04 05 06 07 08 09 10 N:10 Marker 01 02 03 04 05 06 07 08 09 N:9 MOVE PLAY CANCEL RETURN · The number 02 is displayed and the scene is memorized. · DVD-RAM or DVD-RW (VR mode) discs have the Marker function instead of the Bookmark function. Since the scenes may be displayed as many different pages, numbering is necessary. If a disc in use is encoded with disc Protect, Markers cannot be set or delete. Only playback is available. MOVE PLAY CANCEL RETURN · When a marker is cleared while DVD-RAM/-RW (VR mode) is playing, marker numbers will change. For example, if the 7th marker is cleared after ten markers are registered, the marker numbers after the eighth will automatically move ahead by one and the 8th marker becomes the 7th. 50 - English VR15SB-2-eng 5/6/05 9:46 AM Page 51 Playing back an Audio CD (CD-DA) Each disc has a variety of menu functions available. Buttons on the Remote Control used for CD playback Playing back an Audio CD(CD-DA) 1 Insert an audio CD (CD-DA) into the disc tray. · The audio CD menu appears and the tracks (songs) are played automatically. CD Repeat : Off 01. TRACK 6 MOVE OK Music Play Option : Normal 00 : 52 4:39 4:31 4:30 3:53 4:23 4:24 EXIT · Press the menu button when the audio CD menu disappear. buttons to select Disc Navigation, and then press the OK button twice. 2 Press the . . . buttons to select the track (song) to start playback from, and then press the OK button. · You can also select the track (song) by pressing the number buttons on the remote control. Playback Audio CD (CD-DA) Screen Elements CD Music Repeat : Off 01. TRACK 6 MOVE OK Play Option : Normal 00 : 52 4:39 4:31 4:30 3:53 4:23 4:24 EXIT !@ Current track (song): Displays the number of the track currently being played. # Displays the current play index and total track number. 1. l oeoe button : Returns to the beginning of the current track when pressed during playback. If pressed again, playback starts from the beginning of the preceding track. If you press this button within three seconds after playback starts, the previous track will be played. If you press this button after three seconds, the current track will be replayed from the beginning. QUICK : To select the top menu on screen display (Repeat or Play Option). $ This shows the operating state of a disc and a playback time corresponding to a portion that is currently played. % Displays the track list (song list) and the playing time of each track. [. . . ] Did you move your DVD Recorder & VCR suddenly from a cold place to a warm place?In this case, remove discs and wait for one to two hours with the power on, and then, insert the disc and try to playback again. Angle operation is available only when the disc contains images captured at different angles. · Check whether there is damage or foreign materials on your disc. [. . . ]