User manual TOSHIBA 19DV733G

[. . . ] LCD TV/DVD COMBINATION 32DV733R OWNER'S MANUAL Owner's Record The model number and serial number are on the back of your TV/DVD. Refer to these numbers whenever you communicate with your Toshiba dealer about this TV/DVD. ©2010 Toshiba Corporation Before operating the unit, please read this manual thoroughly. Model number: _________________ Serial number: _________________ Precautions CAUTION: THIS UNIT IS A CLASS 1 LASER PRODUCT. [. . . ] However, it will show "No Event Name" for programmes which are more than eight days ahead, or for programmes within the eight days when no programme information is available. 1 Press GUIDE to display the EPG menu. 2 Press TV/RADIO to toggle between three service modes -TV, Radio, and Data - to view the EPG data accordingly. If you wish to view the list of Radio services without exiting the current menu, press TV/RADIO once. If you wish to view the list of Data services without exiting the current menu, press TV/RADIO twice. As you scroll through the service list by pressing / , the Event List will be refreshed accordingly, and you will see the programme information for the currently highlighted programme(s). To scroll through the service list from page to page, press the Red/SLOW or Green/ PAUSE button. Each row shows a list of events that are available for the corresponding service in the service list. Within each row, you can press to navigate through the rest of the events. You can easily move to the Previous day or Next day in the Event List by pressing the Yellow/PLAY MODE or Blue/SLOW button (the date of the programme you are currently viewing is shown on the top right corner). Event title will be displayed only if available; otherwise "No Event Name" message will be displayed. 3 From the Guide menu, you can open the Description menu for the currently highlighted programme(s) by pressing . You can scroll and view the complete descriptions of the event using /. To clear the menu screen, press EXIT/CANCEL 50 EPG Timer (DTV mode only) You can choose whether or not to switch on your TV screen when a timer event begins (see page 31: Rec Screen Status (LCD Power on/off)). This is so that if you are using the timer to make a recording from your VCR or other device, the TV screen will not turn on unless you want it to. switching to another channel, while the timer event is in progress, the following message will appear: "Warning: Changing the channel will interrupt your event timer. Select Yes or No according to your wishes. 1 Press GUIDE to display the EPG menu. 2 Press / / / to highlight the programme you want to set as a timer event, and then press ENTER/CH LIST . Note: · To display the stored timer events, press GUIDE twice, and then the Event Timer menu (see step 4 below) will appear. You can also delete or change the frequency (Once/ Daily/Weekly) of the stored timer events, but please note that you cannot edit the time details that have been set from the EPG. 3 4 A confirmation banner will display on-screen. Press / to select Yes or No, and then press ENTER/CH LIST option is shown in blue). Press the Red/SLOW button to set the timer mode for a selected event. (the selected 5 The frequency of Timer wake-up specified by the Timer mode can be set as Once, Daily or Weekly. Press ENTER/CH LIST to save the selected timer mode. Note: To delete a timer event, select the specified event and then press the Green/PAUSE button. 6 To return to the EPG menu, press ENTER/CH LIST To clear the menu screen, press EXIT/CANCEL . . Note: · When the EPG Timer starts, the message "Event Timer Started" will appear. · If the EPG Timer starts when it is already switched on, it will start at the exact time that is set. If it starts from the standby mode, it will begin 20 seconds ahead of the starting time. · You cannot hasten the starting time from the original starting time of an Event. · Press the Yellow/PLAY MODE button to change the starting time of an event. [. . . ] There is no warranty that our efforts or the library will fulfill any of your particular purposes or needs. This library is provided with all faults, and the entire risk of satisfactory quality, performance, accuracy, and effort is with the user. libpng versions 0. 97, January 1998, through 1. 0. 6, March 20, 2000, are Copyright (c) 1998, 1999 Glenn Randers-Pehrson, and are distributed according to the same disclaimer and license as libpng-0. 96, with the following individuals added to the list of Contributing Authors: Tom Lane Glenn Randers-Pehrson Willem van Schaik libpng versions 0. 89, June 1996, through 0. 96, May 1997, are Copyright (c) 1996, 1997 Andreas Dilger, and are distributed according to the same disclaimer and license as libpng-0. 88, with the following individuals added to the list of Contributing Authors: John Bowler Kevin Bracey Sam Bushell Magnus Holmgren Greg Roelofs Tom Tanner libpng versions 0. 5, May 1995, through 0. 88, January 1996, are Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc. For the purposes of this copyright and license, "Contributing Authors" is defined as the following set of individuals: Andreas Dilger Dave Martindale Guy Eric Schalnat Paul Schmidt Tim Wegner The PNG Reference Library is supplied "AS IS". [. . . ]