User manual TOSHIBA DRWST-53

[. . . ] T&C TEC Drawer Unit DRWST-53 SERIES Table of Contents TEC CORPORATION l Request Regarding Maintenance n Utilize our maintenance services. After purchasing the machines, contact your sales agent once per year or so to have the inside of the machines cleaned. Otherwise, dust will build up inside the machines and may cause fire or malfunction. [. . . ] HANDLING THE DRAWER OF THE DRAWER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 3 5. HOW TO FIX DRAWER IN PLACE ON THE TERMINAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 6 6. SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Copyright 0 1995 by TEC CORPORATION All Rights Reserved 2613 Nakameouro. INTRODUCTION Thank you for purchasing the TEC DRWST-53 Series Remote Drawer. This drawer can be connected to various terminals including the ST-4500 Series, which has been developed as a high-grade POS terminal. This drawer can be used as either first drawer or secondary drawer (the second drawer required). 1. I Precautions 1) Do not subject the equipment to sudden shocks. 4 3) 4) 5) 6) 7) 8) The cover should be cleaned by wiping with a dry cloth or a cloth slightly dampened with a mild detergent solution. NEVER USE THINNER OR ANY OTHER VOLATILE SOLVENT on the plastic covers. DO NOT POUR WATER directly onto the drawer and NEVER IMMERSE THE DRAWER IN WATER. Be sure to use the equipment within the proper ranges of power, current consumption, temperature and relative humidity. APPEARANCE AND NOMENCLATURE Drawer Cable Cash \ Drawer Release Lodt -l- DRWST-53 EOl-19022 SERIES Accessory 0 Parts `ITEC 9 Drawer Release Key (1 pc; 2 keys) sE"c P Cash Drawer Cover Key (1 pc; 2 keys) Flanged Screw (M4x8) (1 PC) Flanged Screw (M3X8) (1 PC) Nylon Clamp (1 PC) 3. INSTALLING THE DRAWER Turn the POWER SWITCH to OFF of the ST-4500 terminal before connecting the cables. Connect the connector of the Drawer Cable to DRWlT of the Control Unit. -2- DRWST-53 EOl-19022 SERIES 4. HANDLING OF THE DRAWER n Manual cash drawer releasing l Opening the Drawer Usually, the drawer is released automatically on finalizing each transaction. In the event of a power failure or othertroubles, the drawer can be opened in the following manner. 1) Insert the Drawer Release Key into the Drawer Release Lock and turn the key clockwise. 2) The Drawer Release Key can be taken out by returning it to the original position. 1 l Removing the Drawer 1) Pull the drawer out, and when it stops at the stopper, lift the drawer up and pull it further out (Fig. [. . . ] Take out the drawer cable from the upper part of the drawer and fix in place onto the drawer, using the nylon clamp and screw that are attached to the DRWST-53. Cable 4) Attach the drawer to the ST-4500 terminal and fix it in place with the screw attached to the DRWST-53. fr Flanged Screw (M4x8) DRWST-53 -5- DRWST-53 EOl -19022 SERIES 6. SPECIFICATIONS Size 460 mm (W) x 430 mm (D) x 120 mm (H) (including the rubber feet) 8. 5 Kg 0. 2 A Max. Drawer release signal and release sense signal (Power is supplied by the Control Unit : DC + 24 V) 0°C to 40°C 10% to 90% RH (with non condensation 1. 5 m allowed) Weight Power Consumed Interface with the Control Unit Ambient Temperature Relative Humidity Cable Length -6- T&C TEC CORPORATION El PRINTED IN JAPAN EOI -19022 [. . . ]