User manual TOSHIBA CF27E55

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual TOSHIBA CF27E55. We hope that this TOSHIBA CF27E55 user guide will be useful to you.


TOSHIBA CF27E55 : Download the complete user guide (2946 Ko)

Manual abstract: user guide TOSHIBA CF27E55

Detailed instructions for use are in the User's Guide.

[. . . ] We hope that you are completely satisfied with your Toshiba Plasma television and that it will give you long and enjoyable service. We look forward to providing you with additional Toshiba products to serve all of your entertainment needs in the future. NOTICE OF POSSIBLE ADVERSE EFFECTS ON PLASMA DISPLAY If a fixed (non-moving) pattern or image remains on the Plasma display for extended periods of time, the image can become permanently ingrained in the Plasma display and cause subtle but permanent ghost images. (See item 34 on page 4 for details. ) NOTE TO CATV INSTALLERS This is a reminder to call the CATV system installer's attention to Article 820-40 of the U. S. NEC, which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to grounding system of the building, as close to the point of cable entry as practical. [. . . ] G : All ages PG : Parental guidance PG-13 : Parental guidance less than 13 years old R : Under 17 years old Parental guidance suggested NC-17 : 17 years old and above X : Adult only 9. When you are done selecting the ratings, press EXIT to return to normal viewing. R AT I N G S E T G PG PG-13 R NC-17 X : : : : : : ON /OFF ON ON ON ON ON :SELECT :ADJUST Using the TV's Features When you try to view a program with a ratings block, a message will appear listing the program's ratings. The program can still be viewed if you press MUTE and then enter your password to temporarily by pass the block. Note: If the remote control does not operate your TV, press the "TV" button on the remote control and try again. You can use V-CHIP SET (DTV) function when the digital broadcasting with a new rating system is received on the TV. Appendix 27 3X80501A_En_p26-31 27 3/7/06, 3:51 PM Locking channels With the CH LOCK feature, you can lock specific channels. You will not be able to tune locked channels unless you clear the setting. You can choose to lock up to nine TV channels and nine cable channels. Use the Channel Number buttons (0-9 and 100) to display the television channel you wish to lock. Use the Channel Number buttons (0-9) to enter your password, then press ENTER. Press or to highlight CH LOCK and press to display the CH LOCK menu. Press or to select the following: SET: to set the channel as one to be locked. When you are finished locking channels, press EXIT to return to normal viewing. Repeat steps 1-7 to erase other channel labels. CT-885 Using the TV's Features Note: If the remote control does not operate your TV, press the "TV" button on the remote control and try again. 30 3X80501A_En_p26-31 30 3/7/06, 3:51 PM Selecting the video input source Press INPUT to view a signal from another device connected to your TV, such as a VCR or DVD player. You can select ANT, VIDEO1, VIDEO2, VIDEO3 ColorStream HD1, ColorStream HD2, HDMI1, HDMI2 or PC, depending on which input jacks you used to connect your devices (see "Connecting your TV" on page 8. ) SOURCE SELECTION 0. ANT 1. VIDEO1 2. VIDEO2 3. VIDEO3 4. ColorStream HD1 5. ColorStream HD2 6. HDMI1 7. HDMI2 8. PC [0-8]:SELECT Introduction Please note the following regarding the HDMI1 and HDMI2 source selections: NOTE: DO NOT CONNECT A PC USING ONE OF THE HDMI INPUTS. ALWAYS use the VGA port provided to connect a PC. Pressing INPUT on the remote control displays the current signal source (press INPUT again or 0-8 to change) See "Connecting an HDMITM or DVI device" on page 14 and "Connecting a PC" on page 17 for details. Connecting your TV You also can use the Channel / buttons to select the video input source. In addition to cycling through your programmed channels (page 24), the Channel / buttons will also cycle through the video input sources, in the order illustrated below. ANT (programmed channel) PC HDMI2 HDMI1 VIDEO1 VIDEO2 VIDEO3 INPUT DISPLAY Input ColorStream HD2 ColorStream HD1 Channel Numbers Labeling the video input sources The video label feature allows you to label each input source for your TV from the following preset list of labels: : Uses the default label name VCR : Video cassette recorder DVD : DVD video DTV : Digital TV set-top box SAT : Satellite box CBL : Cable box HD : HDMI device To label the video input sources: 1. Press EXIT to return to normal viewing. TV Setting up your TV Channel / Menu/Enter Exit OPTION ON TIMER FAV O R I T E C H CH LABEL VIDEO LABEL OFF SELECT ADJUST Using the TV's Features VIDEO LABEL 1. VIDEO1 2. VIDEO2 3. VIDEO3 4. ColorStream HD1 5. ColorStream HD2 6. HDMI1 7. HDMI2 RETURN SELECT -- / VCR / DVD / DTV -- S AT / C B L -- -- -- -- -- ADJUST Setting the clock You must set the clock before you can program the ON timer. After setting the clock, the date and time function starts automatically. Press EXIT to return to the normal screen. CT-885 Note: SETUP L A N G UAG E CLOCK SET TV / CABLE C H P RO G R A M ADD / ERASE ENGLISH After a power failure or disconnection of the power, the clock settings will be lost. CABLE SELECT ADJUST Note: Appendix CLOCK SET MONTH DAY YEAR TIME 1 1(SUN) 2006 12:00AM If the remote control does not operate your TV, press the "TV" button on the remote control and try again. SELECT ENTER:SET ADJUST EXIT:END 31 3X80501A_En_p26-31 31 3/7/06, 3:51 PM Setting the ON timer This feature allows you to program the TV to turn on automatically at a set time. If you program the ON TIMER to "DAILY, " the TV will turn on every day at the same time to the same channel until you clear the ON TIMER. To set the ON timer: (Example: Turning on the TV to channel 2 at 6:30 AM, DAILY) 1. Press or to set the desired hour, then press . ON TIMER ON TIMER 6:30AM Note: After a power failure or disconnection of the power, the timer settings will be lost. INPUT DISPLAY TV CH 2 CLEAR RETURN SELECT ADJUST Menu/ Enter 7. Press or to select ONCE or DAILY, then press ENTER. ON TIMER ON TIMER 6:30AM Exit CH 2 O N C E / D A I LY / C L E A R RETURN SELECT ENTER:SET 9. [. . . ] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE TOSHIBA CF27E55




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual TOSHIBA CF27E55 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.