User manual TOSHIBA BDX5400

[. . . ] IMPORTANT CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. D3-4-2-1-1_A1_En CAUTION This product is a class 1 laser product classified under the Safety of laser products, IEC 60825-1:2007. Operating Environment Operating environment temperature and humidity: +5 °C to +35 °C (+41 °F to +95 °F); less than 85 %RH (cooling vents not blocked) Do not install this unit in a poorly ventilated area, or in locations exposed to high humidity or direct sunlight (or strong artificial light) D3-4-2-1-7c*_A1_En CLASS 1 LASER PRODUCT D58-5-2-2a_A1_En WARNING This equipment is not waterproof. [. . . ] Control On Off To use PQLS (BDP-440), Sound Retriever Link and Stream Smoother Link (page 16), Control must be set to On. HDMI Deep color 30bits 36bits Off HDMI 1080P 24Hz On Off HDMI 3D Auto Off 3D notice Yes No Select this when outputting the video signals with 30-bit color. Select this when outputting the video signals with normal 24-bit color. Select this when Resolution is set to Auto or 1080P and outputting 1080p/24 video signals to a TV compatible with 1080p/24. Select this when Resolution is set to 1080P and outputting 1080p/60 video signals to a TV compatible with 1080p/60. This sets whether or not to display the 3D notice when playing 3D images. Book Page 41 Thursday, July 7, 2011 2:29 PM Setting Network Language IP setting Proxy Server Information Connection test Internet Connection Options Explanation 07 Select this to set the IP address of the player and DNS server (page 43). Only set the proxy server if so instructed by your Internet service provider (page 43). Enable Disable Permitted Partial Permitted Prohibited Select this when connecting to the Internet. Only discs whose safety has been confirmed are allowed to connect to BDLIVE. BD-Live connection Dlna Enable Disable OSD available languages Choose a language for the on-screen displays from the listed languages. Auto Power Off Off 10 min 20 min 30 min Quick Start On Off Select to shorten the required time to boot up. (page 45) Software Update Disc USB Storage Network Load Default System Information Disc Auto Update Restore the settings to the factory default. On Off Display the software update screen when the disc with the player’s update file is loaded. (page 45) Display and set up the BUDA data on the connected USB memory device. Use /// to set the IP address of the player or DNS server, then press ENTER. • Auto Set IP Address On – The player’s IP address is obtained automatically. Select this when using a broadband router or broadband modem that has a DHCP (Dynamic Host Configuration Protocol) server function. This player’s IP address will automatically be allocated from the DHCP server. Use the number buttons (0 to 9) to input the IP address, subnet mask and default gateway. • Auto Set DNS Server Address On – The DNS server’s IP address is obtained automatically. Use the number buttons (0 to 9) to input the DNS server’s IP address stipulated by your Internet service provider. [. . . ] Digitized videos, images and audio retain the same quality even when they are copied or transferred repeatedly. DRM is a technology for restricting the distribution or playback of such digital data without the authorization of the copyright holder. π Port number This is a sub-address provided below the IP address for simultaneously connecting to multiple parties during Internet communications. π Progressive scan With this method, one picture is consisted of a single picture, without dividing it in two pictures. [. . . ]