User manual TOSHIBA 20HL85

[. . . ] Introduction ENER Y STAR PARTNER Connecting your TV LCD Color Television Setting up your TV Using the TV's Features Appendix 20HL85 J3U70101C(E)Cover 1 15/06/2005, 4:09 PM Introduction Always read and understand the PRODUCT WARNINGS and USER DIRECTIONS that are contained in this manual before attempting to use your television, to help ensure its safe use. Always store this manual near your television for convenient future reference. NOTE TO CATV INSTALLERS This is a reminder to call the CATV system installer's attention to Article 820-40 of the U. S. NEC, which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to grounding system of the building, as close to the point of cable entry as practical. For additional antenna grounding information, see item 17 on page 4. Dear Customer, Thank you very much for purchasing this Toshiba television. [. . . ] If adding channels, you must select the channel to add using the Channel Number buttons. Press or to select ADD or ERASE, whichever function you want to perform. Repeat steps 1-5 for other channels you want to add or erase. SETUP L A N G UAG E ENGLISH 12:00AM CABLE CLOCK SET TV / CABLE C H P RO G R A M ADD / ERASE ADD / ERASE :SELECT :ADJUST CT-885 In addition to cycling through your programmed channels, the Channel 3 / 4 buttons will also cycle through the video input sources (page 30) in the order illustrated below. ANT (programmed channel) PC HDMI VIDEO1 VIDEO2 Using the TV's Features ColorStream HD Changing channels To change to the next programmed channel: Press Channel 3 / 4 on the TV or CH 3 / 4 on the remote control. To change to a specific channel (programmed or unprogrammed): Press the Channel Number buttons (0-9 and 100) on the remote control. For example, to select channel 125, press 100, 2, 5. Note: If the remote control does not operate your TV, press the "TV" button on the remote control and try again. Appendix 23 J3U70101C(E)P17-24 23 15/06/2005, 4:11 PM Using the TV's features Adjusting the channel settings Switching between two channels You can switch between two channels without entering an actual channel number each time. Each time you press CH RTN, the TV will switch back and forth between the two channels. Programming your favorite channels You can preset up to 12 of your favorite channels using the Favorite Channel Programming feature. Because this feature scans through only your favorite channels, it allows you to skip other channels you do not normally watch. You can still use Channel 3 / 4 to scan through all the channels you programmed in the TV's memory. Press L or M to highlight FAVORITE CH. INPUT DISPLAY Channel Numbers CH RTN TV Channel 3 4 Menu/ Enter OPTION ON TIMER FAVORITE CH CH LABEL VIDEO LABEL OFF FAV :ADJUST :SELECT 5. SET/CLEAR will be highlighted. Exit FAVORITE CH SET / CLEAR SETUP CH RETURN :SELECT 0 0 0 0 0 0 :CH002 TV CABLE 0 0 0 0 0 0 :ADJUST ENTER:SET 6. To select your favorite channels: Press the FAV L / M buttons on the remote control to select your favorite channels. The FAV L / M buttons will not work until you have programmed your favorite channels. Press or to highlight CLEAR. Using the TV's Features CT-885 Note: FAVO R I T E C H SET / CLEAR SETUP CH RETURN :SELECT :ADJUST ENTER:CLEAR 0 0 0 0 0 0 :CH002 TV CABLE 0 0 0 0 0 0 If the remote control does not operate your TV, press the "TV" button on the remote control and try again. 7. Press ENTER until "0" replaces the channel number you want to erase. Repeat steps 1-8 for the other channels. 24 J3U70101C(E)P17-24 24 15/06/2005, 4:11 PM Using the LOCKS menu Note : The V-Chip feature is available for the U. S. You can prevent others from viewing certain programs or channels by blocking them using the V-Chip feature. Introduction Note: The password you programmed is also used in the LOCKS menu; see pages 26-28. Selecting a password Before you can use the V-Chip Feature to block programs and channels, you must select a password. The password you select prevents others from changing the rating limits you set. Press L or M to display the password entering mode. INPUT DISPLAY LOCKS NEW PASSWORD ---- Connecting your TV Display Channel Numbers SELECT:[0-9] ENTER : SET EXIT : END 4. If you are accessing the LOCKS menu for the first time, select a four-digit number to be your password. Press ENTER. TV LOCKS NEW PASSWORD Menu/ Enter Setting up your TV SELECT:[0-9] ENTER : SET EXIT : END 5. If the wrong password is entered, "ERROR" blinks about 4 seconds. Exit LOCKS CONFIRM PASSWORD SELECT:[0-9] ENTER : SET EXIT : END Using the TV's Features 6. See "Using the V-Chip (parental control) feature" (page 26), "Locking channels" (page 27), "Locking the video inputs" (page 27), "Setting the GameTimerTM" (page 28) or "Using the panel lock feature" (page 28). [. . . ] YOU MUST PAY FOR ALL TRANSPORTATION AND INSURANCE CHARGES FOR THE TELEVISION TO AND FROM THE SERVICE DEPOT. Owner's Manual and Product Registration Read this owner's manual thoroughly before operating this LCD Television. Register your LCD Television online at www. toshiba. ca as soon as possible. By registering your LCD Television you will enable TCL to bring you new products specifically designed to meet your needs and help us to contact you in the unlikely event a safety notification is required. [. . . ]