User manual TOSHIBA 20HL67

[. . . ] Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference that may cause undesired operation. The party responsible for compliance to these rules is: Toshiba America Consumer Products, L. L. C. Ph: (973) 628-8000 Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ] · If you press EXIT during autoprogramming, the function will stop and only the channels programmed up to that time will be stored in the channel memory. Programming channels automatically Your TV can automatically detect all active channels in your area and store them in the channel memory. After the channels are programmed automatically, you can manually add or erase individual channels (see page 22). Press MENU/ENTER, and then press or until the CH Program menu appears. Press or to highlight CH PROGRAM. CH Program TV/CATV CH PROGRAM Add/Erase Favorite Channel > Blue Screen On MENU/ENTER EXIT Add TV/CATV CH PROGRAM Add/Erase Favorite Channel > Blue Screen On MENU/ENTER EXIT Add TV 100% CH Program TV 100% TV/CATV CH PROGRAM Add/Erase Favorite Channel > Blue Screen On MENU/ENTER EXIT Add CH Program TV 100% EXIT CH 4. 5. Press or MENU/ENTER to start auto-programming. The TV will automatically cycle through all the TV and Cable channels, and store all active channels in the channel memory. Press CH 21 Index Appendix Using the TV's features MENU/ ENTER Setting up your TV Using the remote control Connecting your TV Adding and erasing channels manually After you have automatically programmed the active channels into the TV's channel memory, you can manually add or erase specific channels. Press MENU/ENTER, and then press or until the CH Program menu appears. Press or to select Add or Erase. CH Program TV/CATV CH PROGRAM Add/Erase Favorite Channel > Blue Screen On MENU/ENTER EXIT Add TV 100% TV/CATV CH PROGRAM Add/Erase Favorite Channel > Blue Screen On MENU/ENTER EXIT Add CH Program TV 100% TV side panel CHANNEL 5. Press EXIT to leave and save the setting. The current channel is added to the TV's memory or erased from the channel list. EXIT MENU/ ENTER Changing channels To change to a specific channel (programmed or unprogrammed): Press the Channel Number buttons (0­9 and 100). For channels 100 and higher, press the 100 button, and then the next two numbers. To change to the next programmed channel: or CH on the TV or remote control. Select the ratings and categories you want to block. Note: The V-Chip function is available for the U. S. V-Chip system. V-Chip rating and categories Rating guidelines are provided by broadcast stations. Most television programs and television movies can be blocked by TV rating and/or category. Movies that have been shown at the theaters and direct-to-video movies use the MPAA movie rating system instead. For Movies previously shown in theaters: Movie Ratings: · Unblocked · G & above (general audience) · PG & above (parental guidance suggested) · PG-13 & above (13 years and older) · R & above (restricted) · NC-17 & above (18 years and older) ·X (adult) If you select "PG-13 & above, " all G and PG rated movies will be available, and all PG-13, R, NC-17 and X rated movies will be blocked. For Television programs including made-for-TV movies: General TV Ratings: · Unblocked · TV-G & above (general audience) (individual categories do not apply) · TV-PG & above (parental guidance suggested) · TV-14 & above (14 years and older) · TV-MA (mature audience) Children TV Ratings: · Unblocked · TV-Y & above (youth) (individual content categories do not apply) · TV-Y7 (youth, 7 years and up) Content Categories: · Dialog - sexual dialogue (applies to TV-PG & above, TV-14) · Language - adult language (applies to TV-PG & above, TV-14 & above, TV-MA) · Sex - sexual situations (applies to TV-PG & above, TV-14 & above, TV-MA) · Violence (applies to TV-PG & above, TV-14 & above, TV-MA) · F. Violence - fantasy violence (applies only to TV-Y7) · No Rating (blocks all viewing) Using the TV's features 26 E V-Chip blocking (Parental control) setup 1. Press to enter the Block Setting page. Special Language Picture Size Timer Setting > Closed Caption Block Setting > Backlight English Natural F S Introduction Special Language Off Picture Size Timer Bright Setting > Closed Caption Block Setting > MENU/ENTER EXIT Backlight English Natural Off Bright Block Setting Enter Password: Change Password > V-Chip Blocking Setting > Panel Lock Off ---- MENU/ ENTER MENU/ENTER EXIT : Please enter 4 characters password 3. Block Setting Enter Password: Change Password > V-Chip Blocking Setting > Panel Lock Off ---- To unlock the program, press the password you set. : Please enter 4 characters password and enter MENU/ENTER EXIT 4. Block Setting Enter Password: Change Password > V-Chip Blocking Setting > Panel Lock ---- V-Chip Blocking Setting USA TV Ratings > Moive Ratings N/A Off MENU/ENTER EXIT MENU/ENTER EXIT 27 Index Appendix Using the TV's features To set the type of blocking: Press or to highlight V-Chip Blocking Setting >. For USA TV Ratings, press to display the next page and select the rate to be set. For Moive Ratings, press or to select an item to be set. To skip this program, press channel number buttons or CH to select other channel. VIDEO1 BLOCKED **** Setting up your TV Change Password New Password: ---- If you try to watch a TV program that exceeds the rating limits you set, the TV enters program lock mode. Using the remote control · If you already set a password, enter your four-digit password. · If you have not created a password, the TV is initially set up with the password "0000". · If you cannot remember your password, press "7777". [. . . ] You are responsible for all TRANSPORTATION AND INSURANCE CHARGES FOR THE inbound transportation and insurance charges for the LCD TELEVISION TO AND FROM THE SERVICE DEPOT. Rental Units For additional information, visit TACP's website: The warranty for LCD Product rental units begins on the date of the www. tacp. toshiba. com first rental or thirty (30) days after the date of shipment to the rental firm, whichever comes first. ALL WARRANTIES IMPLIED BY THE LAW OF ANY PROVINCE OF CANADA, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR TCL warrants LCD Products that are sold and used for commercial PURPOSE, ARE EXPRESSLY LIMITED TO THE DURATION OF purposes as follows: all parts are warranted against defects in THE LIMITED WARRANTIES SET FORTH ABOVE. WITH THE materials or workmanship for a period of ninety (90) days after the EXCEPTION OF ANY WARRANTIES IMPLIED BY THE LAW OF date of original retail purchase. [. . . ]