User manual TORNADO T02260

[. . . ] Before switching on, make sure that the voltage of your electricity supply is the same as that indicated on the rating plate on the bottom of the cleaner. Close supervision is necessary when any appliance is used by or near children. Use the vacuum cleaner only for its intended use as described in these instructions. [. . . ] Use the vacuum cleaner only for its intended use as described in these instructions. Empty the dust bin before it is full in order to maintain the best efficiency. Slide to the Stop(or Min)position before inserting a plug into the electrical outlet. Do not use the vacuum cleaner to pick up matches, live ashes or cigarette butts. Avoid picking up hard, sharp objects with the vacuum cleaner as they may damage the cleaner parts. Switch the vacuum cleaner off on the body of the machine before unplugging from the electrical outlet. Disconnect the plug from the electrical outlet before changing the dust bag or dust container. To avoid damage, please remove the plug by grasping the plug itself, not by pulling on the cord. Be cautious not to damage brush during unclogging. maintain tools and filter _9 maintain tools and filter EMPTYING ThE DUST bIN 1 2 3 Once dust reaches the dust full mark, or sution is Take the dust bin out by noticeably reduced during cleaning, empty the dust bin. pressing the button. Separate the dust bin cover. 4 5 6 Throw away dust into the bin. Close the dust bin cover. Before use, push the dust bin into the main body of the vacuum cleaner until you hear the "click" sound. - Empty into a plastic bag (recommended for asthma/allergy sufferers) You may rinse the dust bin with cold water. 10_ maintain tools and filter maintain tools and filter WhEN TO clEAN ThE DUST PAcK - If suction is noticeably reduced during cleaning, please check the dust pack as indicated below. 03 MAINTAIN TOOlS AND FIlTER Turn the vacuum power to 'MAX'. HANDLE CONTROL If suction is noticeably reduced with the inlet floating 10cm above flat floor, clean it. When suction is noticeably reduced continuously, please cleaning the Dust Pack as shown in the following illustration. maintain tools and filter _11 clEANING ThE DUST PAcK 1. Let the sponge and filter dry in the shade for more than 12 hours. 5. Put the assembled dust pack into the main body. Make sure the filter is completely dry before putting it back into the vacuum cleaner. Allow 12 hours for it to dry. 12_ maintain tools and filter maintain tools and filter clEANING ThE MOTOR PROTEcTION FIlTER 03 MAINTAIN TOOlS AND FIlTER Take out both the dust bin and the dust pack. Remove the motor protection filter from the vacuum cleaner. Shake and tap the dust from it and put back in machine. clEANING ThE OUTlET FIlTER OPTION - MIcRO FIlTER Press the fixed frame part at the back of the main body to remove. Remove and replace the blocked outlet filter. OPTION Replacement filters are available at your local Samsung distributor. maintain tools and filter _13 troubleshooting pROblem Motor dows not start. [. . . ] Allow 12 hours for it to dry. 12_ maintain tools and filter maintain tools and filter clEANING ThE MOTOR PROTEcTION FIlTER 03 MAINTAIN TOOlS AND FIlTER Take out both the dust bin and the dust pack. Remove the motor protection filter from the vacuum cleaner. Shake and tap the dust from it and put back in machine. clEANING ThE OUTlET FIlTER OPTION - MIcRO FIlTER Press the fixed frame part at the back of the main body to remove. Remove and replace the blocked outlet filter. OPTION Replacement filters are available at your local Samsung distributor. maintain tools and filter _13 troubleshooting pROblem Motor dows not start. [. . . ]