User manual TOPCOM ULTRA OUTDOOR 2010C

[. . . ] 0 - 12/10 Important To use ‘Caller ID’ (display caller), this service has to be activated on your phone line. Normally you need a separate subscription from your telephone company to activate this function. If you don’t have the Caller ID function on your phone line, the incoming telephone numbers will NOT be shown on the display of your telephone. 18 1 2 3 17 16 15 14 4 5 6 7 13 12 19 8 9 11 10 UK NL F D ES To be connected to the public analogue telephone network. [. . . ] 10 Setting the loudspeaker volume 4 or 15 during the call to adjust the loudspeaker Press volume. The default setting is level “3”: The volume is adjusted in the same way in hands free mode. 11 Call duration display The call duration is shown in the display during an external call: A display of ‘10:40’ means: 10 minutes and 40 seconds. The call duration is shown in the display for another 8 seconds after the call is ended. This function allows you to make a call without having to hold the handset in your hand. Press If you want to change the volume while in hands free 4 or 15 several times. 12 Mute 2 to deactivate the microphone during a Press the mute key call. You can now speak freely without the party on the other end 16 Butler Outdoor 2010 - Twin - Triple of the line being able to hear you. 2 must be Handset - settings and operation 16 or right 5 key to move the cursor. Use the Use the left # 8 key to toggle between upper and lower case letters. 13 Pause key (dialling pause) If you want to insert a dialling pause while dialling a telephone number, press the pause key P 8 for 3 seconds at the appropriate point in the number until a P appears in the display. If you then dial this number (or select it for redial), the dialling pause (approx. 16 Setting the ringer volume on the handset You can set the ringer volume for incoming calls (internal or external) to 6 levels (levels 1 to 5 and ‘OFF’). Press 17 to confirm your selection or press ESC 3 to exit the menu without saving. 14 Finding the handset from the base station (paging) 19 If you cannot find the handset, briefly press the paging key on the base station. All handsets registered on the base station ring which allows them to be located. 15 Using the alphanumeric keypad Use the alphanumeric keypad to enter a text. For example, if you press the ‘5’ numeric key, the letter ‘J’ appears in the display first. Press the key repeatedly to enter other characters assigned to this key. Press the ‘2’ key once to select the letter ‘A’. If you want to enter ‘A’ and ‘B’ in succession, first press the ‘2’ key once to select the letter ‘A’. Then wait for a second to move to the second character, then press key ‘2’ twice to enter ‘B’. [. . . ] You can help the environment by recycling some parts or raw materials from used products. also dispose of packaging materials in an environmentally friendly way. Contact your local authority for more information on collection points in your area. 2 Cleaning Risk of electric shock or short circuit from contact with components that conduct electricity. [. . . ]