User manual TOPCOM TWIN TALKER 3500

[. . . ] To remove the clip from the unit, push up on the belt clip (2) while pulling the clip tab (1). When re-installing the belt clip, a click indicates the BeltClip is locked into position. Receiving a Signal The unit is continuously in the RECEIVE mode when the unit is ON and not transmitting. [. . . ] To use the PMR with an AC/DC ADAPTER and rechargeable batteries do the following: 1. Plug the 7, 5 V DC / 200 mA ADAPTER (not included) into the EAR/MIC/CHARGER JACK on the top of the unit and turn it ON by pressing the POWER button. NOTE: The unit cannot transmit calls while the batteries are being charged. Sending Call Tones You can use Call Tones to alert the other user to identify yourself. You can also use Call Tones to signal the beginning or the end of a transmission. If a damaged antenna comes in contact with the skin, a minor burn may result. As batteries can cause property damage and/or bodily injury such as burns if conductive material such as jewelry, keys or beaded chains touches exposed terminals. The material may complete an electrical circuit (short circuit) and become quite hot. Exercise care in handling any charged battery, particularly when placing it inside a pocket, purse or other container with metal objects. do not replace or charge batteries in a potentially explosive atmosphere. Contact sparking may occur while installing or removing batteries and cause an explosion. Do not place your Communicator in the area over an air bag or in the air bad deployment area. If a communicator is placed in the bag deployment area and the air bag inflates, the communicator may be propelled with great force and cause serious injury to the occupants of vehicle. Turn your communicator off when in any area with a potentially explosive atmosphere, unless it is a type specifically qualified for such use. [. . . ] Damage caused by inexpert treatment or operation, and damage resulting from the use of non-original parts or accessories not recommended by Topcom is not covered by the warranty. The warranty does not cover damage caused by outside factors, such as lightning, water and fire, nor does it apply if the unit numbers on the equipment have been changed, removed or rendered illegible. Note: Please do not forget to enclose your receipt if you return the equipment. [. . . ]