User manual TOPCOM BALANCE

[. . . ] Important To use `Caller ID' (display caller), this service has to be activated on your phone line. Normally you need a separate subscription from your telephone company to activate this function. If you don't have the Caller ID function on your phone line, the incoming telephone numbers will NOT be shown on the display of your telephone. BALANCE The features described in this manual are published with reservation to modifications. To be connected to the public analogue telephone network. The CE symbol indicates that the unit complies with the essential requirements of the R&TTE directive. This product is in compliance with the essential requirements and other relevant provisions of the R&TTE directive 1999/5/EC. The Declaration of conformity can be found on: http://www. topcom. net/cedeclarations. asp USER GUIDE V1. 0 - 06/08 This product works with rechargeable batteries only. [. . . ] 5 Confirm or cancel. 5 Caller Identification This service only works when you have a Caller ID/Clip subscription. When you receive an external call, the telephone number of the caller appears on the handset display. If the name is programmed in the phonebook, the name in the phonebook is displayed!The caller identity is replaced by the call duration after 15 seconds in communication. It is still possible to display the caller's identity after this time by pressing the OK key repeatedly for the name and number. The telephone can store 40 calls in a Call List (received and missed calls) that can be reviewed later. This function is only available if your are subscribed to the caller ID information. When the memory is full, the new calls automatically replace the oldest calls in the memory. The callers names will be shown if the name is send by the network or is stored in the phonebook. When is shown, the call is unanswered 3 Press the OK key to see the telephone number. If the telephone number is longer then 12 digits, press the OK key again to see the complete number. 4 Press the OK key again to see the time and date when the call is received. 13 English 5 Delete the unwanted characters and enter the new name. 7 Select a ring melody (1-10) and confirm. Personalize the handset 5 Press the OK key to add this entry to the phonebook if it's not already stored: Press OK when "ADD" is shown on the display. Select the melody (1-10) which will be heard when this number is calling by means of the up/down keys and press OK. 6 Press the off-hook key to call back a correspondent, when their telephone number or name are displayed. You can delete each entry separately: 1 Scroll to the call you want to delete and delete. To delete all entries at ones: 1 Press the delete key long (2 seconds). 2 Confirm or cancel. 6 Personalize the handset Every programmation is confirmed at the end by a double or single long beep. A long beep signifies that the modification has not been taken into account. 6. 1 Adjusting the ring volume Handset ring volume internal/external calls The handset ring volume for internal or external calls can be set separately. You can choose from 5 handset ringer volume levels and "OFF". When the handset is inside the base, the base will not ring during incoming call. So when the handset ring volume is turned off and handset is inside the base, your phone will not ring anymore! [. . . ] 5 Delete the old terminal number and enter the new one (0, 6-9). 4GHI 5JKL 6MNO 6 Press OK to confirm. Memory full When the memory is full, you get the screen message "Memory Full". To continue to receive SMSs, you can delete some or all of the messages. To delete all the messages stored in the "INBOX" or "PERSONAL SMS": 1 Enter the menu 2 Select "SMS" and confirm. [. . . ]