User manual TOMTOM WIRELESS GPS

[. . . ] 12 2/70 The TomTom Wireless GPS receiver Congratulations with the purchase of your TomTom Wireless GPS receiver. You now have one of the smallest and most versatile wireless GPS receivers available today. Your TomTom Wireless GPS receiver gives you total mobility for hiking, sailing and personal navigation - using Bluetooth technology and rechargeable battery power. The AC power adapter will charge your receiver quickly, allowing you many hours of GPS use outdoors. [. . . ] The TomTom Wireless GPS receiver must not be used in these environments. 4/70 2. 4 Heat Reflective Shields Newer model vehicles may have a heat reflective shield embedded in the windshield preventing proper GPS signal reception if the receiver is placed behind the windshield. To enable proper reception: (a) Use an external antenna, or (b) Place the receiver in a different position, or (c) Place the receiver behind the rearview mirror, where many vehicles have an opening in the heat reflective shield, indicated by a black outline 2. 5 Magnets The TomTom Wireless GPS receiver contains strong magnets. Do not place the receiver near any item that may be damaged by magnetic force, such as credit and debit cards. 2. 6 Battery This product uses a Lithium-Ion battery. Refer to operational temperature ranges in the specification appendix. Operation in low (below 0ºC/32ºF) or high (over 45ºC/110ºF) temperatures will affect power supply efficiency and the ability to charge the battery. All Lithium-Ion batteries will experience power supply efficiency deterioration over time, even if not used, and have a limited life expectancy. Do not continue recharging the battery if it does not recharge within the specified time. If the battery leaks and you come into contact with the leaked fluids, rinse thoroughly with water and seek medical attention immediately. Do not put, store or leave your product in or near a heat source; in a high temperature location; in strong direct sunlight; in a microwave oven; in a pressurized container, and do not expose it to temperatures over 60ºC (140ºF). Failure to follow these guidelines may cause the Lithium-Ion battery to leak acid; become hot; explode; or ignite and cause injury and/or damage. THE LITHIUM-ION BATTERY CONTAINED IN THE PRODUCT MUST BE RECYCLED OR DISPOSED OF PROPERLY. USE ONLY WITH SUPPLIED CHARGER(s) AND SUPPLIED AC ADAPTOR FOR BATTERY CHARGING. 2. 7 Installation, Use & Maintenance Do not attempt to service this product yourself. For permanent installation and powering in a vehicle, we recommend hiring a professional service technician. 5/70 For mobile installation, ensure that the GPS receiver has an unobstructed view of the sky, or that it is connected to an optional external antenna Protect your product from excessive heat (see previous paragraph), extreme cold (see previous paragraph), dust, liquids and direct sunlight. When using the product in a mobile environment always fasten the product to prevent accidental movement of it. Ensure that any power supply and/or AC adapter is cooled by placing it in a ventilated area. The power supply and/or AC adapter, the cradle, and the receiver unit may become warm or hot during operation. Only use the supplied PDA Power Cable with PDA's that conform to the specifications of the cable. Follow the instructions in this manual carefully. 2. 8 This Document Great care was taken in preparing this manual. Constant product development may mean that some information is not entirely up-to-date. No liability shall be assumed for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from the performance or use of this material. [. . . ] When charging is completed, the red or orange indicator switches off. 3. 3. 4 Switching on and off To switch the GPS receiver on, press the power button briefly. If the GPS receiver needs charging, the 'Charge and GPS' indicator will remain on. The Bluetooth indicator will switch off. 3. 3. 5 Setting up a connection with your PDA/Smartphone/Laptop Please refer to the Bluetooth connection setup instructions in the documentation that comes with your PDA, Smartphone or laptop. You will need to set up a Serial Port connection between the GPS receiver and your device. [. . . ]