User manual TNB TRANSFORMER

[. . . ] The copyright of this manual is reserved by Samsung Electronics, Co. , Ltd. The contents of this manual may not be partially or in whole reproduced, distributed or used in any form without the written permission of Samsung Electronics, Co. , Ltd. The TNB logo and SyncMaster are the registered trademarks of Samsung Electronics, Co. , Ltd. Microsoft, Windows and Windows NT are the registered trademarks of Microsoft Corporation. [. . . ] Brightness This menu is unavailable when < Description Bright> is set to <Dynamic Contrast> mode. Controls the contrast of the pictures displayed on the screen. Contrast · · This menu is unavailable when < This menu is unavailable when < Bright> is set to <Dynamic Contrast> mode. Color> is set to <Full> mode or <Intelligent> mode. Controls the clarity of details of pictures displayed on the screen. Sharpness · · This menu is unavailable when < This menu is unavailable when < Bright> is set to <Dynamic Contrast> mode. Color> is set to <Full> mode or <Intelligent> mode. Using the product 3-8 Menu Description Provides preset picture settings optimized for various user environments such as editing a document, surfing the Internet, playing games, watching sports or movies and so on. · <Custom> If the preset picture modes are not sufficient, you can configure the <Brightness> and <Contrast> directly using this mode. · <Standard> <Game> This mode provides the picture setting appropriate for surfing the Internet (text + picture). Bright · This mode provides the picture setting appropriate for playing games that include lots of graphics and that require a fast screen refresh rate. · <Cinema> This mode provides brightness and sharpness settings similar to those of a TV for the best entertainment environment (movie, DVD, etc. ). · <Dynamic Contrast> Controls the picture contrast automatically so that bright and dark pictures are balanced overall. Coarse The location of the screen may be changed after the adjustment. In this case, move the screen so that the screen is displayed at the center of the display panel using the <H-Position> menu. The logo displayed above the <Connect> button can be changed by uploading a replacement image via the Administrative Web Interface. Figure 2-1: OSD Connect Screen Installing the Software 4-1 Connect Button Selecting the Connect button initiates a PCoIP or RDP session, depending on the session settings. While the PCoIP connection is pending, the OSD local GUI will display a "Connection Pending" message. When the connection is established, the OSD local GUI will disappear and be replaced with the session image. Figure 2-2: OSD Connect Screen (Connecting) OSD <Options> Menu Selecting the <Options> menu will produce a list of selections. The OSD <Options> menu contains: · · · · · <Configuration> <Diagnostics> <Information> <User Settings> <Password> Selecting one of the selections will produce a settings window. 4-1 Installing the Software Figure 2-3: OSD <Options> Menu <Configuration> Window The <Configuration> window allows the administrator to access window tabs with settings that define how the Portal operates and interacts with its environment. The tabs in the <Configuration> window are: · · · · · · · · · · <Network> <Label> <Connection Management> <Discovery> <Session> <RDP> <Language> <OSD> <Reset> <VMware View> Each tab has <OK>, <Cancel>, and <Apply> buttons that allow the administrator to accept or cancel the setting changes made on the tab. Some PCoIP devices have password protection disabled and do not require a password to login into the administration webpages or access the OSD parameters. Password protection for the Log In page and OSD can be enabled through PCoIP Management Console. <Network> Tab The <Network> tab allows an administrator to set the Portal network parameters. The Network parameters can also be configured using the Webpage Administration Interface. Installing the Software 4-1 Figure 2-4: <Network> Configuration · <Enable DHCP> When <Enable DHCP> is enabled, the device will contact a DHCP server to be assigned an IP address, subnet mask, gateway IP address and DNS servers. When disabled, the device requires these parameters to be set manually. <IP Address> The IP Address field is the device's <IP address>. This field must be a valid IP address, and if an invalid IP address is entered, the OSD will prompt the administrator to correct it. [. . . ] If the beep sound is generated 3 or more times when booting up the computer, please request service for the computer. No sound Ensure that the audio cable is firmly connected to both the audio-in port on your monitor and the audio-out port on your sound card. If the volume is still too low after turning the control to its maximum, check the volume control on the computer sound card or software program. 5-2 Troubleshooting 5-3 FAQ FAQ!Windows XP : Change the frequency by selecting Control Panel Appearance and Themes Display Settings How can I change the frequency of the video signal? Advanced Monitor, and then change the refresh rate under Monitor Settings. Windows ME/2000 : Change the frequency by selecting Control Panel Display Settings Advanced Monitor, and then change the refresh rate under Monitor Settings. [. . . ]