User manual TNB NEDV032930

[. . . ] They are to be read and used by everyone assigned to service and repair faults in the appliance. Retain these operating instructions and pass them on, with the appliance, to any future owners. Any copying or reproduction, including as extracts, as well as the reproduction of images, also in an altered state, is not permitted without the express written consent of the manufacturer. Intended use This appliance is intended only for use in the reception of FM radio stations, as a kitchen timer, to give alarms through signal tones, radio or iPod / iPhone and for the connection of external audio appliances (e. [. . . ] The set alarm time of the respective alarm is shown blinking in the display and the indicator resp. The weekdays on which this alarm is activated are shown above the time indicator. ™ Using the buttons / Up 17 and i / Down 19 , or the / Up 42 / Down 32 buttons on the remote control, set the desired alarm and time. Holding the respective button down for more than 2 seconds starts the speed setting. Setting the weekdays ♦ In alarm-mode, press the button Function / ST 7 , or the button Function / ST 38 on the remote control, to toggle between the weekday combinations Mon-Fri, Sat-Sun or Mon-Sun. The respective selected combination is indicated above the alarm time. ™ Press and hold the button Function / ST 7 , or the Function / ST 38 button on the remote control, for at least 2 seconds, so as to switch between the weekday combinations and adjustment options for an individual weekday. NOTICE ► With the adjustment options for an individual weekday, switch between the weekdays with the button Function / ST 7 , or the button Function / ST 38 on the remote control. 54 NEDV032930 Handling and operation Setting the alarm with an alarm tone ♦ To select an individual "alarm tone" option for the respective alarm, in alarm-mode press the button i / Pr+ / AL1 18 or the button i / Pr– / AL2 16 resp. The button Pr+ 40 or the button Pr– 44 on the remote control, the symbol appears. Until in the display GB Setting the alarm with radio If it is intended that the radio switches on at the alarm time, carry out the following settings before activation of the alarm: ♦ Switch the radio on by pressing the button Power 6 , or the button 30 on the remote control, and with the button Function / ST 7 , or the button Function / ST 38 on the remote control, select the operating mode radio. 56 NEDV032930 Handling and operation Kitchen timer The appliance has a convenient kitchen timer with which, for example, cooking and baking times can be monitored. The programmable time range of the kitchen timer lies between 1 minute and 23 hours, 59 minutes. GB Setting the kitchen timer ♦ Press the button Timer 8 , or the button Timer 37 on the remote control. In the display the cooking pot symbol for the kitchen timer is faded in. ™ Using the buttons / Up 17 and i / Down 19 , or the / Upbutton 42 and the / Down-button 32 on the remote control, set the desired running time for the kitchen timer. Holding the button down for more than 2 seconds starts the speed setting. 15 seconds passes without any changes taking place, the appliance reverts back to the previous operational mode. Starting the kitchen timer ♦ After setting the time, press the button Timer 8 , or the button Timer 37 on the remote control, once again. In the display a backwards-running clock NOTICE ► If, during the operation of the kitchen timer, another function is selected, the indicator of the remaining time is faded out. The cooking pot symbol and the backwards-running clock continue to be indicated in the display . Press the button Timer 8 or the button Timer 37 on the remote control once again to display the remaining time for the kitchen timer for about 10 seconds. [. . . ] Troubleshooting In this section you receive important information for the localisation and remedying of malfunctions. Safety instructions WARNING Pay heed to the following safety information to avoid risks and property damage: ► Repairs to electronic appliances may only be carried out by specialists who have been trained by the manufacturer. Considerable risk for the consumer and damage to the appliance can occur as a result of incompetent repairs. NEDV032930 67 Troubleshooting Malfunction causes and remedies The following table will help with the localising and remedying of minor malfunctions: GB Defect The display is showing nothing. [. . . ]