User manual TNB MLDV032640

[. . . ] The kiddy guardianfix pro 2 parts are indicated by a letter in brackets in this user manual and are explained at the beginning under the point with the same descriptor. To gain the most comprehensive protection for your child, the kiddy guardianfix pro 2 must be used exactly as described in this manual. The kiddy guardianfix pro 2 has been tested and licensed according to the latest version of the ECE-R44/04 licensing specifications. It received design certification for the “universal” and “semi-universal” class of products. [. . . ] Check to see that the headrest (G) is firmly locked in place by gently pressing down on it. Your child can enjoy substantially better seating comfort by adjusting the leg extension (L). 3 Adjustment of leg extension (AG II-III, 15-36kg) Never put the seat in the reclining or upright position while driving. To do that, stop your vehicle, unfasten the seat belt and take your child out of the child seat. To adjust the reclining position keep the release button (S) pressed (Fig. 11; Point 1) and at the same time pull the seat (I) away from the backrest of the vehicle (Fig. The more you pull the child safety seat forward the 7 The reclining position may only be used for children of the age group I (9 – 18 kg) together with the impact shield and in case of semi-universal fixation with the k-fix connectors. ENG The backrest (C) of the kiddy guardianfix pro 2 automatically tilts into the reclining position. The reclining position is reached when the headrest (G) of the child safety seat touches the backrest of the vehicle seat (Fig. The maximum reclining position is reached when the seat (I) cannot be pulled forward any further. The maximal angle of the reclining position depends on the position of the Isofix anchorage points in the vehicle. The reclining position may only be used for the age group I (9 – 18 kg) together with the impact shield. To secure your child in the seat fixed with k-fix, please proceed as described in Section 7. Securing the child Semi-universal: If you want to use the car seat with the k-fix mounting, make sure it is secured in the vehicle as described in Section 6!Universal: If you want to use the child safety car seat without the k-fix mounting, the k-fix connectors must be retracted into the seat (I)!10 Position your kiddy child safety seat on the car seat as described in section 5. 1 Securing the child in the age group I (9 – 18 kg) ENG Check to see whether your kiddy is adjusted to the size or body weight of your child (Section 4). The kiddy guardianfix pro 2 is secured with the three-point vehicle restraint using the belt guide on the impact shield (N) (Fig. Your kiddy guardianfix pro 2 may only be used for Age Group I with the impact shield (M) and seat cushion (K) belonging to it. If you want to use it semi-universally (fixed with k-fix) please follow the instructions from section 6. Push the impact shield (M) into the guide slots on the seat section (Fig. Slide the impact shield back so that it rests right on your child's tummy. [. . . ] Always remove the seat cushion (K) for use without the impact shield (M). If you want to use it semi-universally (fixed with k-fix) please follow the instructions from section 6. Place the child in the seat and make sure that your kiddy has been adjusted according to the child's body size (Section 4). Take the following steps to secure your child with the vehicle’s own 3-point belt: Now close the belt buckle. [. . . ]