User manual TNB KNNB01

[. . . ] –º Connect this appliance only to correctly installed mains power sockets supplying a mains voltage of 220-240 V ~/50 Hz. –º To avoid risks, arrange for defective plugs and/or power cables to be replaced at once by qualified technicians or our Customer Service Department. –º In the event of operating malfunctions and before cleaning the appliance, remove the plug from the mains power socket. –º Always remove the power cable from the socket by pulling on the plug, not on the power cable itself. [. . . ] Reassemble the appliance after using and/or cleaning it so that you do not injure yourself with the exposed blade. –º NEVER attempt to remove foodstuffs from the bowl for as long as the blade is still rotating. –º Before removing the motor block, wait until the blade has stopped rotating. –º Pay heed to the table regarding the filling quantities given in the chapter “Chopping”. Items supplied The appliance is delivered with the following components as standard: ▯ Universal Food Processor consisting of: – Bowl with Stand – Blade holder – Lid with sealing ring – Motor unit ▯ These operating instructions NOTICE ► Check the contents to ensure everything is present and available and for signs of visible damage. –º If the delivery is not complete, or is damaged due to defective packaging or transportation, contact the Service Hotline (see chapter Service). 12 14:48 Operating components 1 Turbo button 2 Motor unit 3 Lid 4 Sealing ring 5 Blade holder 6 Blade 7 Bowl 8 Appliance base GB Initial Preparations Unpacking ♦ Remove all components of the appliance and these operating instructions from the carton. ™¦ Clean all of the components as described in the section "Cleaning and care". Disposal of the packaging The packaging protects the appliance from transport damage. The packaging materials are selected from the point of view of their environmental friendliness and disposal technology and are therefore recyclable. The recirculation of packaging into the material circuit saves on raw material and reduces the amount of waste generated. This is normal and does not influence the functioning of the appliance. NOTICE ► You can use the appliance base 8, after the processing of the foods has been completed, as a lid for the bowl 7, to help keep the food fresh for longer. –º Take the motor unit 2 and lid 3 off of the bowl 7. –º The blade holder 5 with the blade 6 can, if you wish, remain in the bowl 7. –º Disconnect the appliance base 8 from the underside of the bowl 7. You can now place the appliance base 8 on the bowl 7 and press it in the middle so that it closes the bowl 7. –º Before cleaning, ALWAYS remove the plug from the mains power socket!This would increase the risk of a potentially fatal electric shock should liquids come into contact with power carrying components. –º To prevent injuries, exercise caution when handling the extremely sharp blade 6. Reassemble the Universal Food Processor after using and/or cleaning it so that you do not injure yourself on the exposed blade 6. –º Do not clean the motor unit 2, the appliance base 8 and the sealing ring 4 in a dishwasher, as this would damage them. [. . . ] This product is subject to the provisions of European Directive 2002/96/EC. Dispose of this appliance through an approved disposal centre or at your community waste facility. Technical data Power supply Rated power Protection class Maximum filling volume for foodstuffs 220 - 240 V ~, 50 Hz 400 W II / up to the 400 ml marking Notes on the Declaration of Conformity With regard to conformity with essential requirements and other relevant provisions, this appliance complies with the guidelines of the Electromagnetic Compatibility Directive 2004/108/EC as well as the Directive for Low Voltage Devices 2006/95/EC. The complete original declaration of conformity can be obtained from the importer. [. . . ]