User manual TNB CHBA035436

[. . . ] The copyright of this manual is reserved by Samsung Electronics, Co. , Ltd. The contents of this manual may not be partially or in whole reproduced, distributed or used in any form without the written permission of Samsung Electronics, Co. , Ltd. The TNB logo and SyncMaster are the registered trademarks of Samsung Electronics, Co. , Ltd. Microsoft, Windows and Windows NT are the registered trademarks of Microsoft Corporation. [. . . ] Use this button to control the brightness of the screen. Using the product 3-4 ICON Use this button to select a function. If you press the [ DESCRIPTION ] button when there is no OSD, the input signal (Analog/Digital) is switched. When the input signal is switched by pressing [ ] button or the product is turned on, a message displaying the selected input signal appears at the top left of the screen. This function is not available for products with an Analog interface only. AUTO Press [AUTO] button to adjust the screen settings automatically This function is only available in Analog mode. If the resolution settings are changed in the Display Properties, the AUTO adjustment function is performed. Press this button to turn the product on or off Power LED This LED is turned on when the product works normally. For more information on the power-saving function, refer to the power saving function in More Information. When not using the product for a long time, unplugging the power cord is recommended to minimize power consumption. 3-4 Using the product 3-5 Using the Screen Adjustment Menu (OSD: On Screen Display) The Screen Adjustment Menu (OSD: On Screen Display) Structure Top Menus PICTURE Brightness Coarse COLOR Color Gamma SIZE & POSITION H-Position Reset SETUP&RESET PC/AV Mode Menu Transparency INFORMATION Monitor functions may vary according to models. V-Position Language Key Repeat Time Image Size Eco Saving Customized Key Menu H-Position Off Timer On/Off Auto Source Menu V-Position Off Timer Setting Display Time Contrast Fine Red Green Blue Color Tone Sub Menus Sharpness Bright Angle PICTURE Menu Controls the screen brightness. Brightness · · This menu is unavailable when < Description Bright> is set to <Dynamic Contrast> mode. This menu is unavailable when <Eco Saving> is set. Controls the contrast of the pictures displayed on the screen Contrast · · This menu is unavailable when < mode. Red This menu is unavailable when < Color> is set to <Full> mode or <Intelligent> mode. You can adjust the green color value of pictures according to your preference. Green This menu is unavailable when < Color> is set to <Full> mode or <Intelligent> mode. You can adjust the blue color value of pictures according to your preference. Blue This menu is unavailable when < Color> is set to <Full> mode or <Intelligent> mode. You can set the color temperature according to your preference. · · · · Color Tone · <Cool 2> - Sets the color temperature of the screen to very cool. <Normal> - Sets the color temperature of the screen to the standard color temperature. <Warm 2> - Sets the color temperature of the screen to very warm. · <Custom> - Select this menu to set the color temperature manually. If you do not like the preset color temperatures, you can manually adjust the value of RGB. · · This menu is unavailable when < This menu is unavailable when < Color> is set to <Full> mode or <Intelligent> mode. Angle> is set. Using this menu, you can change the intensity of the colors of medium brightness. Gamma · <Mode1> - <Mode2> - <Mode3> This menu is unavailable when < Angle> is set. 3-5 Using the product (This is unavailable when < Bright> is set to <Dynamic Contrast> and <Cinema> mode. ) SIZE & POSITION Menu Description Moves the position of the display area on the screen horizontally. H-Position · · This function is only available in Analog mode. When a 720P, 1080i or 1080P signal is input in AV mode , select <Screen Fit >to adjust horizontal position in 0-6 levels. Moves the position of the display area on the screen vertically. [. . . ] Windows XP : Change the frequency by selecting Control Panel Appearance and Themes Display Settings Advanced Monitor, and then change the refresh rate under Monitor Settings. Windows ME/2000 : Change the frequency by selecting Control Panel Display Settings Advanced Monitor, and then change the refresh rate under Monitor Settings. Windows Vista : Change the frequency by selecting Control Panel Appearance and Personalization Personalization Display settings Advanced settings Monitor, and then change the refresh rate under Monitor Settings. Windows 7 : Change the frequency by selecting Control Panel Appearance and Personalization Display Adjust resolution Advanced settings Monitor, and then change the refresh rate under Monitor Settings. (For more information, refer to the User Manual of the computer or the graphics card. ) Windows XP : Change the resolution by selecting Control Panel Appearance and Themes Display Settings. [. . . ]