User manual TJERNLUND RB10 INSTALLATION

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual TJERNLUND RB10. We hope that this TJERNLUND RB10 user guide will be useful to you.


TJERNLUND RB10 INSTALLATION: Download the complete user guide (210 Ko)

Manual abstract: user guide TJERNLUND RB10INSTALLATION

Detailed instructions for use are in the User's Guide.

[. . . ] Control with built-in on/off switch inside register or use a remote on/off switch or programmable timer, available from most do-it-yourself hardware stores. Optional SCP speed control is also available from Tjernlund if desired. SPECIFICATIONS Model RB10 RB12 Voltage 115 115 Watts 20 20 Sones 1. 4 1. 4 RPM 1800 1800 CFM 75 75 RB10 Blower Housing 4 9/16" RB12 Blower Housing 4 9/16" 9 15/16" 11 15/16" 5 1/8" 3 15/16" RB10 5 1/8" 3 15/16" 2 9/16" RB12 2 9/16" 10 9/16" 11 1/8" 12 11/16" 13 3/16" RB10 Blower Grille RB12 Blower Grille 5 3/4" 5 3/4" 11 3/4" 13 3/4" INSTALLATION RESTRICTIONS 1. [. . . ] A remote on/off switch or programmable timer, available at most do-it-yourself hardware stores may be utilized with the Register Booster. Optional SCP speed control is also available from Tjernlund if desired. INSERT REGISTER BOOSTER INTO REGISTER BOOT. SCREW TO FLOOR. PLUG REGISTER BOOSTER INTO 115 VAC OUTLET. ON/OFF SWITCH IS LOCATED UNDERNEATH GRILLE. ALTERNATE WALL REGISTER INSTALLATION 1. If you are using an existing wall grille and not the Grille included with the Register Booster skip to step 2. If using the Grille included with the Register Booster, place the Grille on the Register Booster before installation and mark (2) holes to be drilled in the Grille through the (2) holes in Register Booster flange. Vacuum out any debris from register boot before installing Register Booster. If Register Booster does not fit into register boot it may be necessary to tap register boot in select spots to get Register Booster to fit. IMPORTANT: Do not force fit the Register Booster or damage may result. A remote on/off switch or programmable timer, available at most do-it-yourself hardware stores may be utilized with the Register Booster. Optional SCP speed control is also available from Tjernlund if desired. MAINTENANCE It may be desirable to gently clean or vacuum the register booster blades periodically. WARNING: Before cleaning the Register Booster disconnect power cord from outlet. Dust accumulation on blower fan and assembly may be gently removed with a soft cloth moistened with a non-abrasive detergent, a soft bristle vacuum attachment or it can be blown out with compressed air. The Register Booster fan motor is permanently lubricated and requires no oiling. [. . . ] Some states do not allow limitation on how long an implied warranty lasts, so that limitation may not apply to you. In addition, some states do not allow the exclusion or limitation of incidental or consequential damages, so that above limitation or exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other rights which may vary from State to State. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE TJERNLUND RB10




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual TJERNLUND RB10 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.