User manual THRUSTMASTER UNIVERSAL CHALLENGE 5-IN-1

[. . . ] Using the MAPPING button (3), you can also program the “L / R” triggers onto the pedal set for progressive acceleration and braking. (To do so, if necessary, modify the “control options” in your game’s interface. ) 3/10 PLAYSTATION® 2 INSTALLATION ON PLAYSTATION® 2 1. IMPORTANT NOTES FOR PLAYSTATION® 2 - In certain driving games, don’t hesitate to test out your wheel’s 2 sensitivity modes in order to optimize its precision and responsiveness. [. . . ] - DEFAULT MAPPING FOR BUTTONS AND PEDAL SET ON PC 6/10 ADVANCED FUNCTIONS ADJUSTING THE WHEEL’S SENSITIVITY Your wheel’s steering has 2 sensitivity modes: - Normal sensitivity (the default mode) - High sensitivity (must be selected) • Selecting “High sensitivity” mode: Action LED Simultaneously press and release: OFF the D-Pad (2) + the 2 UP and DOWN levers (7) Your wheel’s steering is now more sensitive. (You must repeat this procedure after each restart or disconnection of your wheel. ) • Selecting “Normal sensitivity” mode (the default mode): Action LED Simultaneously press and release: ON the D-Pad (2) + the 2 UP and DOWN levers (7) Your wheel’s steering has now returned to normal sensitivity (the default mode). PROGRAMMING THE WHEEL AND PEDALS Your wheel is fully programmable: - All buttons, the D-pad and the Up and Down levers can be switched between themselves. - All buttons, the D-pad and the Up and Down levers can be programmed onto the 2 pedals. • Examples of possible applications: - On PS2 and PS3: Program L2/R2 onto the 2 Up and Down digital levers. € Programming procedure Steps 1 2 3 Action Press and release the MAPPING button (3) Press and release the button to be programmed. Press and release the button or pedal onto which you wish to place your function. LED FLASHES SLOWLY FLASHES QUICKLY ON 7/10 • To erase your programming • Step 1 Action Press and hold the MAPPING button (3) for 2 seconds. € Note: Your programming is not saved: you must carry out the programming again after each restart or disconnection of your wheel. LED FLASHES QUICKLY AND TURNS BACK ON TROUBLESHOOTING AND WARNING • My wheel doesn’t function correctly or appears to be improperly calibrated: - Switch off your computer or your console, completely disconnect your wheel and all of its cables, then reconnect everything and restart your game. - In your game’s “Options / Controller / Gamepad” menu: Select the most appropriate configuration (according to the default or programmed mapping on your wheel). - Please refer to your game’s user manual or online help for more information. - Never move the wheel or pedals when connecting your wheel, to avoid any calibration problems. € My pedal set doesn’t function correctly: - Reconfigure your wheel in your game’s “Options / Controller / Gamepad” menu. - You can also use your wheel’s mapping function to assign new functions to the pedals to resolve this type of problem. € My wheel’s steering is not responsive enough: - Switch your wheel to “High sensitivity” mode. 8/10 TECHNICAL SUPPORT If you encounter a problem with your product, please go to http://ts. From there you will be able to access various utilities (Frequently Asked Questions (FAQ), the latest versions of drivers and software) that may help to resolve your problem. If the problem persists, you can contact the Thrustmaster products technical support service (“Technical Support”): By email: In order to take advantage of technical support by email, you must first register online. The information you provide will help the agents to resolve your problem more quickly. Click Registration on the left-hand side of the Technical Support page and follow the on-screen instructions. [. . . ] Windows® and Windows® XP are registered trademarks of Microsoft Corporation in the United States and/or other countries. All other trademarks and brand names are hereby acknowledged and are property of their respective owners. Contents, designs and specifications are subject to change without notice and may vary from one country to another. ENVIRONMENTAL PROTECTION RECOMMENDATION At the end of its working life, this product should not be disposed of with standard household waste, but rather dropped off at a collection point for the disposal of Waste Electrical and Electronic Equipment (WEEE) for recycling. [. . . ]