User manual THRUSTMASTER TOP GUN FOX 2 PRO

[. . . ] Microsoft®, Xbox™ and the Xbox™ logo are either registered trademarks or trademarks of Microsoft Corporation in the U. All other nationally and internationally recognized trademarks and brand names are hereby acknowledged. [. . . ] - Use Preset 1 if game configuration is: (Recommended for Deadly Skies Novice mode) - Use Preset 2 if game configuration is: (Recommended for Deadly Skies Expert mode) - Use Preset 3 if game configuration is: (Recommended for Star Wars Starfighter) Control Accelerate / Brake Rudder Accelerate / Brake Rudder Accelerate / Brake Rudder Accelerate / Brake Rudder Button Triggers - Right & Left Right mini-stick - Left & Right Triggers - Right & Left Black / White X/A Triggers - Right & Left Right mini-stick - Up & Down Triggers - Right & Left D WICHTIGER HINWEIS: Sie können den Thrustmaster Flight-Stick auch für Spiele verwenden, die keine Joystick-Unterstützung bieten (z. Xbox US Mapping of other buttons in preset configurations: please refer to the illustration on the right. LOADING PRESETS Preset 1: press the Program (4) button - the LED turns red. Press the Vibration (5) button - the LED flickers green and turns off. To return to the default configuration: hold down the Program (4) button for more than 3 seconds: the LED will flicker green and turn off. CHANGING THE VIBRATION SETTING Vibration button: sets the degree of vibration for the motor. Press the Vibration (5) button once: the LED turns green, and then turns off (Vibration = off). Press the button again: the LED turns yellow, and then turns off (Vibration = 50%). Press the button once more: the LED button turns red, and then turns off (Vibration= 100%). PROGRAMMING OVERVIEW If you wish to modify the existing presets, you can use the programming function. Each time you unplug the flight stick or turn off the console, your programming will be erased. The function of every button, D-Pad direction or axis can be applied to another button, D-Pad direction or axis (axes include roll & pitch axes, throttle and twisting handle). [. . . ] The A button now performs the up throttle’s function, and the throttle in the upper position retains its original function. To return to the default configuration: hold down the Program (4) button for more than 3 seconds: the LED will turn red during this time, and will then turn green for 2 seconds. [. . . ]