User manual THRUSTMASTER T.FLIGHT HOTAS X

[. . . ] This rudder function is accessible on your joystick by rotating the handle to the left or right. This rudder function is accessible in two ways: - on your joystick by rotating the handle (4) to the left or right. If you are only using the rocking button (or if you are not using the rudder function), you can disable the handle's rotation thanks to the locking screw (5) located on the base of the joystick. Use a flat head screwdriver to change the screw’s position and thus lock/unlock the rudder function. [. . . ] - On PlayStation® 3, the joystick is only compatible with PlayStation® 3 games (and will not function with PlayStation® 2 games). - When connecting your joystick: Leave the handle, rudder and throttle centered and do not move them (to avoid any calibration problems). 6/12 “AUTOMATIC PRESET” CONFIGURATION - PLAYSTATION® 3 “AUTOMATIC PRESET” diagram on PlayStation® 3 RED HOME LED This preset corresponds to the default configurations for most aerial simulation games on PlayStation® 3. It will therefore allow you to start playing your game right away, without having to reconfigure your joystick. The 4 handle directions correspond to the 4 directions on the PS3 gamepad’s left mini-stick. The throttle corresponds to the Up/Down directions on the PS3 gamepad’s right mini-stick. The rudder (via rotating handle and rocking button) corresponds to the Left/Right directions on the PS3 gamepad’s right mini-stick. 7/12 ADVANCED FUNCTIONS 2 PROGRAMMING MODES The PRESET button (6) and its LED allow you to view the type of programming selected: AUTOMATIC (preprogrammed) or MANUAL (programmed by yourself). A single press of this button will allow you to switch from one programming mode to the other, even during the course of a game. € AUTOMATIC PRESET: LED IS OFF This represents the default programming: the axes, positions of the buttons and of the hatswitch are preprogrammed. pLEASE REFER TO THE “AUTOMATIC PRESET” CONFIGURATION DIAGRAM. € MANUAL PRESET: LED IS GREEN This represents your own personal programming: - The buttons, axes and the hat-switch can be switched between themselves. - You can modify the programming to suit your taste and whenever you like. - Programming is automatically saved in your joystick (even when it is disconnected). - When your “MANUAL PRESET” is blank, it is identical to the “AUTOMATIC PRESET”. EEPROM MEMORY • • Your joystick features an internal chip which saves all of your "MANUAL PRESET" programming (even when your joystick is switched off or disconnected for a long period of time). You can save a different "MANUAL PRESET" for each platform used: - one for PC in 4 axes mode - one for PC in 5 axes mode - one for PlayStation® 3 PROGRAMMING/MAPPING • Your programming is carried out using the MAPPING button (7). examples of possible applications: - Switching the positions of buttons. - Switching axes between themselves = directions of the handle, of the throttle or of the rudder (in this case, you must map the 2 directions of the first axis to those of the second. Press and release the button or direction onto which you wish to place your function. Your “MANUAL PRESET” is now enabled and up to date (with your programming carried out). PRESET LED GREEN FLASHES GREEN SLOWLY FLASHES GREEN QUICKLY GREEN ERASING A "MANUAL PRESET" Steps Action 1 Enable your MANUAL PRESET (6) Press and hold the MAPPING button (7) 2 for 2 seconds. [. . . ] All other trademarks and brand names are hereby acknowledged and are property of their respective owners. Contents, designs and specifications are subject to change without notice and may vary from one country to another. ENVIRONMENTAL PROTECTION RECOMMENDATION At the end of its working life, this product should not be disposed of with standard household waste, but rather dropped off at a collection point for the disposal of Waste Electrical and Electronic Equipment (WEEE) for recycling. This is confirmed by the symbol found on the product, user manual or packaging. [. . . ]