User manual THRUSTMASTER 2.1 SOUND SYSTEM

[. . . ] THRUSTMASTER ® QUICK INSTALL US RECOMMENDED USE • Refrain from opening the cabinet as there are sensitive, fragile components inside. € Unplug the speakers’ power cord and disconnect them from your computer before cleaning. [. . . ] Connect one end of the minijack cable to the minijack plug on the subwoofer. Connect the other end of the minijack cable to the minijack/RCA splitter. Connect your console cable’s red and white RCA connectors to the minijack/ RCA splitter. Connect your console cable’s yellow video out connector to the video in plug on your television or VCR. US • If you have a European (SCART) console cable without white and red RCA connectors, connect the minijack cable directly to your television’s headset output. € If your television doesn’t have a headset output, you will have to purchase a separate SCART/RCA console cable, also available from Thrustmaster. TECHNICAL SPECIFICATIONS Total output power: 50 Watts RMS; subwoofer power output: 30 Watts RMS; satellite power output: 10 Watts RMS per speaker; frequency response: 30Hz – 20kHz. All other trademarks and brand names are hereby acknowledged and are property of their respective owners. Contents, designs and specifications are subject to change without notice and may vary from one country to another. US USING THE SPEAKERS • Check that the different volume controls (TREBLE, BASS, VOLUME) are set at the minimum level. [. . . ] € The 2-way speakers separate treble and medium sounds, thus reducing the risk of sound overloading. In addition, the top portion of each speaker rotates by 90° to enhance the 3D sound performance. [. . . ]