User manual THERMALTAKE PSU

[. . . ] Cluster of high speed fans inside a chassis can create undesired noises. Hardcano 12 SE is designed to efficiently address this issue by focusing on components that are generating the most noise and in the same time simply the entire process. Hardcano 12 SE can deliver functions that none others have even attempted. [. . . ] Hardcano 12 SE can deliver functions that none others have even attempted. It has 4 channel of fan speed controller that enables users to manually adjust each fan unit individually or switch it to auto mode that allows the module to adjust fan speed automatically according to temperature status. At a touch of a button, Hardcano 12 SE can deliver fan speed, temperature and alarm status for each of the 4 locations in real-time. Traditional VR knobs have been replaced with more reliable Precision Electronic Buttons. The whole module is the size of a regular CD-ROM drive with stylish and futuristic front bezel design to give any computer a high-tech appeal. Introduction 3 ) Key Introduction 1 5 6 2 7 8 9 3 4 No . Key Function While operating in Manual Mode, each time "+" button is pressed, the corresponding fan will increase by ~3. 125% of its maximum speed. (This function is disabled while operating in Automatic Mode. ) 1 2 + Mode To toggle between Automatic and Manual Mode (Default: Automatic) While operating in Manual Mode, each time "-"button is pressed, the corresponding fan will decrease by ~3. 125% of its maximum speed. **Minimum fan speed is 50% of its maximum speed) To toggle between Celsius and Fahrenheit display mode. (Default: Celsius) To display Fan Speed, Temperature and Alarm setting corresponding toFAN1/T1. 60OC at FAN/T1 13 14 Installation 5 ) Auto and Manual Mode 5. 1 How to distinguish Auto/Manual mode While the computer is idling or under minor workload, it is workload, recommended to switch operating mode to Automatic to minimize the overall noise level. Installation Manual Mode (when you are using the computer or the system workload is heavy ) While operating under Manual Mode, users may adjust the fan speed manually by pressing on "+" button to increase or "-" button to decrease. Auto. Mode (when you away from the computer or the system workload is minor ) Each fan's speed will be automatically adjusted according to each preset location's temperature. Following chart represents the approximate speed at which fan will be operating under at different temperature. "+" KEY: Increase fan speed by 3. 125% of its maximum RPM. Lowest RPM is 50% of its maximum RPM. 5. 2 How to set the mode (12V) (6V) (Environment Temp. ) (Alarm setting Temp. ) 15 16 Q&A Q&A Q1:The Hardcano 12 Module does not come on after system is Powered?Ans: Please make sure the main power connector is connected to Power Supply. Part III Q&A Make sure all connectors are connected securely. Q2: LCD does not display temperature?Ans:1. Make sure its corresponding Thermal Probe is attached correctly to the component you wish to monitor. Examine the Thermal Probe to see if there is any cut or Discontinuity!2. Verify the fan unit you are controlling & monitoring has RPM signal capability. [. . . ] Ans:1. Make sure its corresponding Thermal Probe is attached correctly to the component you wish to monitor. Examine the Thermal Probe to see if there is any cut or Discontinuity!2. Verify the fan unit you are controlling & monitoring has RPM signal capability. [. . . ]