User manual THERMALTAKE CL-P0024
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual THERMALTAKE CL-P0024. We hope that this THERMALTAKE CL-P0024 user guide will be useful to you.
 |
THERMALTAKE CL-P0024 : Download the complete user guide (1806 Ko) |
Manual abstract: user guide THERMALTAKE CL-P0024
Detailed instructions for use are in the User's Guide.
[. . . ] Note >>
Contents >>
Installation>
Please follow the step by step instruction throughout the manual.
Tower112 Installation - AMD K7 Installation - AMD K8 Installation - Intel P4 Installation - Intel LGA775 Installation
01
06
12
18
23
00
K7 >>
LGA775 >>
13
K7 Installation
Holding screw and using screwdriver to tight screw. [. . . ] Failure to do so will void the warranty, result in poor cooling, and could damage the CPU chip.
Align the "H" insulator and the Mylar to the four holes.
O
Note: The direction of the CPU fan should face DDR or PCI slot.
X
Place the "H" metal back plate directly over the Mylar.
"H" Plate Mylar Insulator Motherboard
19
04
K7 >>
LGA775 >>
11
Press the "H" plate with one hand and tighten the nuts to each screws with the other hand.
12
Holding screw and using screwdriver to tight screw. Then, tighten additional nuts to each screws to ensure proper installation.
LGA775 Installation
13 14
Connect the fan connector to the motherboard's fan connector.
Before installing, please make sure components shown are available.
( Tower112 can support 80mm & 90mm fans, fan is optional. )
Installation complete !!
Important!!
Mounting of the Tower112 onto the processor is extremely critical. Please take a few moment to make sure that all four screws are securely evenly and securely.
05
18
P4 >>
K8 >>
17 18
Press the "H" plate with one hand and tighten the nuts to each screws with the other hand.
Holding screw and using screwdriver to tight screw. Make sure the full contact between the CPU core and the heat sink.
K8 Installation
19 20 21
Tighten additional nut to each screws to ensure proper installation.
Connect the fan connector to the motherboard's fan connector.
Before installing, please make sure components shown are available.
( Tower112 can support 80mm & 90mm fans, fan is optional. )
Installation complete.
Important!!
Mounting of the Tower112 onto the processor is extremely critical. [. . . ] Please take a few moment to make sure that all four screws are securely evenly and securely.
Before installing, please make sure components shown are available.
( Tower112 can support 80mm & 90mm fans, fan is optional. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE THERMALTAKE CL-P0024
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual THERMALTAKE CL-P0024 will begin.