User manual THERMADOR PA36GLBH

[. . . ] BACKGUARD INSTALLATION INSTRUCTIONS ­ PRO-HARMONYTM GAS RANGES Front of Range · The backguard must be attached before sliding the range into its final, installed position. [. . . ] Using a T-20 size Torx driver, fasten the backguard with four (4) of the included Torx-head screws to the range's side panels, two (2) screws to the range's back panel, and four (4) screws to the area around the cooling blower. · To secure the front of the backguard, install three (3) of the Torx-head screws through the lower front panel of the backguard, into the flange at the back of the range's cooktop. · The Pot-and-Pan Shelf requires pre-assembly of the top panel to the shell using nine (9) of the enclosed Torx-head screws. For sufficient load strength, YOU MUST attach the two (2) screws through the back corners of the top down into the shell. · The Pot-and-Pan Shelf provides a shelf above the cooktop to keep foods hot or store cooking pans. OBSERVE CAUTIONS BELOW. The back panel of backguard is positioned inside these two guide channels on the back of the range. WARNING: CAUTION: The Pot and Pan Shelf can get very hot! [. . . ] B · 1/10 · © BSH Home Appliances Corporation, 2009 · All rights reserved Litho in USA [. . . ]