User manual THEBEN RAMSES 722-782

[. . . ] AUTO n) oder dauernd Normal- r oder Energiesparbetrieb m, Frostschutzbetrieb f (+6 °C) 7 Temperaturabgleich zur Anpassung an die örtlichen Gegebenheiten 8 Einstellung der Absenktemperatur (Energiesparprogramm) m 9 Verschluss zur Gerätebefestigung 10 Ersatzreiterfach 11 Lüftungsschlitze im Sockel RAM 722s/ 782s day program with segments RAM 722/ 782 day/week program can be switched round, with tappets 2 Manual switching and display normal r or energy saving m (night) 3 LED displays heating operation 4 Electronic feedback for matching to your heating 5 Setting normal temperature r (day) 6 Program selection switch (normal operation in pos. [. . . ] Turn the seal 9 into position with a screwdriver Note: Keep the ventilation apertures 11 in the plinth free, no paint, wallpaper or other such material. Regelung über das Motor - Mischventil The connecting leads must conform to national regulations Commande de vannes mèlangeuses motorisées Besturing van gemotoriseerde mengkranen Comando valvola di miscelazione motorizzata Comando sobre válvula mezcladora motorizada If more than 3 leads are laid, another exernal conductor for the products mains voltage is allowed. 1 hour after starting, the product will have adapted itself to the ambient temperature. After connection to mains voltage the clock needs a few minutes until it runs. Electronic feed-back The clock thermostat is set in the factory to usual heating systems in practical operation. Für Fußbodenheizung / Bimetallmischer / Ölbrenner for floor heating / bi-metal mixer / oil furnance chaudières fuel / brûleurs fuel stookolieketels / besturing van de brander comando valvola di miscelazione motorizzato / bruciatore a gas o a nafta calderas de fuel / quemadores de gas A cold cement wall, the measured temperature deviation can be corrected with the pentiometer 7. Security advice for connecting telephone switch The clock thermostat RAM 782 / 782s has a connection for telephone remote switching (for holiday homes with telephone remote switching). Operation: If connecting terminals 10 and 11 are closed by means of floating contact, the product is controlled at a constant 21 °C. [. . . ] You can also contact us for more information on the environmental performances of our products. [. . . ]