User manual TERRATEC FROM VINYL TO CD IN 5 STEPS

[. . . ] Connection Connect the TerraTec Phono PreAmp with your PC soundcard and your record player as described in the manual. TT phono PreAmp Record Player PC Interface We are P C-Audi o! The example here will show the recording process with the help of the software "CoolEdit 96TM", which is included on the CD that comes with the Phono PreAmp studio. (<CD>:\hotstuff\Shareware_Demos\COOLEDIT'96\). After you have prepared your soundcard for recording and playback under the menu Options\ Select Wave Device, the software is ready. 1 From Vinyl to CD in 5 Steps 2. [. . . ] After pushing the" OK" button the recording process starts and you should now put the pickup needle onto your record. After you have played the first side of your record, stop the recording process by using the "STOP" button. For your own peace of mind we would suggest you save your recording for later processing e. g. Now repeat the recording process for the second side of your record and save it as well. 4. Processing The data file you are working on will be shown in wave form after opening or rather after recording it. We would now recommend that you "normalize" the complete recording to the optimum volume level (Transform \ Amplitude \ Normalize). If you would like to process a complete record side with Sound Laundry TerraTec Edition, save the recording and process the data file with Sound Laundry TerraTec Edition as described in the manual. Afterwards open the clean recording (with crackle and noise removed) with CoolEdit 96. 2 From Vinyl to CD in 5 Steps Sound Laundry TerraTec Edition can also be used separately for each single record track by cutting the single tracks of both record sides as described below. . By clicking and holding the left mouse button and sweeping across the wave-form you can roughly select the first track. If you now click on the "zoom" button the selected sector will expand to full screen. By clicking and holding the right mouse button on the left or right border whilst moving the mouse you can now adjust the left and right borders precisely. We would recommend the use of the function "Smooth Ends" which ensures a clear and cracklefree start and finish to the track. [. . . ] Therefore please set up a new project in Feurio and include the tracks you want to burn by pushing the button "Add Wave". Please refer to the manual for further details on using the Feurio software. . TM The CD burning process can now be started. 4 From Vinyl to CD in 5 Steps [. . . ]