User manual TERRATEC DMX6FIRE CUBASESX TUTORIAL

[. . . ] Help file for Sound System DMX 6fire 24/96 (LT/Basic) and Steinberg's Cubase SX 1. x first of all, we would like to mention that Steinberg offers a general tutorial about Cubase on their website as well as FAQs and knowledge-database. http://www. steinberg. net/en/?sid=0 Getting started After the first time you start Cubase SX, you of course want to select the ASIO driver for the card. [. . . ] For this you will need to open the VST Input window: Here you can select, or in other words, activate the inputs you wish to use on the card. As default is the CD input selected ­ therefore if the Line-in is needed as source for the recording, activate this one by pressing the "active" button. The Line-in (In 3/4) is now ready to be selected in the audio track of your choice as recording source. Open the VST Channel Mixer (Devices/Mixer) By pressing the right mouse button, you will open, like showed above, the context menu. In this menu you can select the Inputs, which have been made available in the VST Input window (In 3/4 for Line-in left/right) for the different audio tracks. These settings can of course be done in the VST Inspector: Additionaly, the record button has to be triggered in the audio tracks where the recording is done. You can do this either in the VST Inspector or in the audio tracks settings themselves. The multitrack recording, e. g. the recording of several VST inputs, has been made easier to handle as in the previous software version, Cubase VST 5. x. Activate first the inputs in the VST Input window, assign these in the Mixer on the existing audio tracks and trigger tracks for the recording (see above). When the setup is made and you are ready to record. Now, if the recorded or imported audio material additionaly has to heard on different outputs, you will need to route the signal. This is easily done in the VST Output window (Devices/VST Output) Cubase SX 1. x recognizes the three analog outputs of the card as separate stereo outputs. [. . . ] Cubase recognizes the outputs as stereo but these are named after the left channel. Please return to the Cubase Mixer (Devices/Mixer): In the pop-up menu at the bottom, you have the possibility to activate Bus/Output for each individual audio tracks or select VST Instruments. The same can be done in the VST Inspector: The handling of the DMX 6fire is the same for the existing models (24/96, LT, Basic) but please note that the cards offer different connection possibilities and therefore some settings/informations are not available. [. . . ]