User manual TERRATEC ACTIVERADIO

[. . . ] B Switches to the next higher or lower station in the frequency range. A lower setting will give you a more precise scan, but will also find a greater number of stations with poor reception. H Switching to mono improves the quality of stations with poor reception. [. . . ] c) Active ­ The station is currently broadcasting traffic information. The system time can be updated automatically via the context menu when an RDS signal is available. In addition, the RDS options can be set to automatically check the system time. (not all stations broadcast time and date signals. ) K This indicator is lit while the station scan is activated and seeking programs. L LOG is lit whenever the LOG function has been activated via the context menu. M The signal strength indicator shows the reception quality of the current station. 6 The ActiveRadio software The context menu Right-click on the display of the ActiveRadio application to open a context menu containing the advanced ActiveRadio settings. In addition to station management, access to the scheduler and settings documented elsewhere, the context menu contains the following items: Update system time Assign RDS name Search for RDS names Set your system time according to the RDS time signal. Check the stations in the station list for RDS names. The ActiveRadio software 7 Station setup Right-click on the ActiveRadio display to open the context menu from which you can access the station setup. Click "Scan" to start the automatic station scan. Use the left-arrow button < to add the selected station to the station memory. Clicking the double left-arrow button << will add all found stations to the station memory. Use the arrow buttons in the "Presets" section to change the positions of the individual stations within the list. To remove stations, select them and click "Remove selected", or click "Remove all" to clear the entire list. To change the properties of a station such as its name or frequency, click "Edit". The same window will be displayed when you select "New". Important: Please note that the precision of the station scan is affected by the level setting in the main window. 8 The ActiveRadio software Options Right-click the ActiveRadio display or press Ctrl + O to adjust the application's settings. Options Volume If your system is equipped with more than one sound card, select the sound card that you are using for the Cinergy under "Windows mixer". (The Line-Out of the Cinergy is connected to the Line-In of the sound card). It's not possible for the program to reliably detect which sound card input you are using for the Cinergy. [. . . ] RDS time signal With the "Automatically update system time" option activated, the ActiveRadio application will automatically update your Windows system time according to the RDS time signal. Volume control Activate the "Increase volume for traffic announcements" option to increase the volume for traffic information. Use the percentage slider to adjust the amount of the volume increase. [. . . ]