User manual TELTONIKA G10 QUICK START V0.2

[. . . ] TELTONIKA ModemUSB/G10 (UM1000) Quick Start V0. 2 Thank you for purchasing our device!We hope this feature-packed, user-friendly device will satisfy your expectations. [. . . ] the components are missing please contact your local distributor. i HOW TO BEGIN? Before you begin make sure that: You are using Windows XP operating system with SP2 installed and you personal computer hardware meets minimal requirements of this operating system. For installation guide on other supported operating systems, please refer to User Guide available on CD. Dial-up networking is installed on your PC (OS) (this should be installed with OS by default). TCP/IP protocol is installed on your PC (it should be present in your OS by default). i INSTALLING THE MODEM CONTROL TOOL Notice: Whenever the driver installation is going to be performed, the modem should be unplugged from the PC!Open the ModemUSB/G10 package, take out the CD and insert it into your CD drive. Advanced User: Can press Browse button to choose specific folder where you wish to install Modem Control Tool. 1 1 2 2 3 3 2 To continue installation plug in your ModemUSB/G10 now and click OK 5 5 4 4 6 6 i SETTING UP AN INTERNET CONNECTION Using ModemUSB/G10 you can access the Internet via one of the following data transmission types: GPRS packet data transfer. In this case you have to know the APN, User Name and Password (all these parameters would be provided by your GSM operator). You have to know the phone number of a dial-up server (all these parameters would be provided by your GSM operator). In this section we will provide you with general information and procedures necessary for setting up an Internet connection to your PC. If GPRS data transfer is used, you have to set up an APN (Access Point Name), Phone Number, User Name and Password if necessary (all these parameters would be provided by your GSM operator). If you are using CSD, you have to know the phone number of the dial-up server. Setting up an Internet connection to your PC: 1) Start the Modem Control Tool. 3) Enter the APN, User Name and Password (user name and password are not always needed; it depends on your network operator). Connecting to the Internet Make sure, that the SIM card is properly inserted into device, the device is properly connected to the PC its , , Power"LED is ON and the drivers are installed properly. [. . . ] If this does not happen, please uninstall and install it again. This sign on the package means that it is necessary to read the User Manual, which is on the CD before you start using the device. This sign on the package means, that used electronic and electric equipment should be stored separately. i FINAL NOTES For more information, please read the ModemUSB/G10 User Manual present on the CD. If you face any problems related to the device, which you are not able to solve by yourself, please contact your local distributor they would be glad to help you. 4 [. . . ]