User manual TELEFUNKEN TX 102

[. . . ] To reduce the risk of a traffic accident, never drive with the sound at a level, that prevents you from hearing sounds outside around the vehicle. To prevent injury from shock or fire, never expose this unit to moisture or water. To prevent damage to the mechanism inside this unit, avoid impact to the TFT monitor. Do not change the fuse on the power wire without professional guidance. [. . . ] Press the direction button on the remote control to move the cursor to the “Hour” or “Min” position, and press the (OK) button. You also can touch the “Hour” or “Min” position directly. Press the numeric button on the remote control or touch the numeric keypad on the screen to adjust the hour or minutes. Press the (OK) button on the remote control or on the keypad of the screen to confirm the setup. Return to normal playback The system will automatically return you to the previous playback mode after idling for a few seconds. Setting Radio Options Function USA Latin Europe Russian No Yes On Off Select the appropriate setting based on the country in which you reside. TS Calibrate TFT Auto Open Adjusting a feature Touch “Yes” to enter the touch screen calibrate mode The TFT panel automatically opens when the unit is turned on. You must press the button on the TFT panel or the button on the remote control to open the TFT . Manual Setting Screen Tilt Options Function Clock Mode 1 to 5 Press the ( / ) buttons on the remote control touch the (1 to 5) number on the screen directly to adjust the tilt of the screen to the desired angle. Clock Load Factory 12Hr 24Hr 00:27 No/Yes Screen Saver On Off Version Selecting a feature for adjustment Press the direction buttons on the remote control or touch the option directly on-screen to select the feature to be adjusted. 16 17 System Setup Menu Language Setting Accessing the language setup menu • Press the (MENU) button on the remote control to access the MAIN menu. Button on the button on the remote control again to close Insert/Eject Disc Inserting a disc When inserting a DVD disc, DVD mode is entered and playback begins. NOTE: You cannot insert a disc, if there is already a disc in the unit or if the power is off. NOTE: CD-R/RW, DVD-R/RW, DVD+R/RWs will only play, if the recording session has been properly closed. Reset the Loading Mechanism If the disc loads abnormally or does not play correctly, press and hold the button on the unit to reset the loading mechanism. 1 2 3 4 5 6 7 Accessing DVD Mode To switch to DVD mode when a disc is already inserted, press the DVD button on the front panel or on the remote control until a ”DVD” sign appears at the top of the screen. Select the repeat point A wherever you want to start and the point B wherever you want to end, then, DVD loops continually between A and B. Touch to choose an audio language (if the disc is recorded in multiple languages). 24 25 DVD Player Operation Controlling Playback Stopping playback Touch the stop icon on-screen or press the / BAND button on the remote control to stop the DVD play; touch the play/pause to resume. Pausing playback icon on-screen or the (OK) button on the remote control 4. Enter a time/track number into the field using the numeric keypad on the remote control or on the screen. Press the OK button on the remote control or on the touch screen to go to the specified location on the disc. [. . . ] Inserting/Replacing the battery: Back side Remove Pull out Battery holder Remove the battery from the battery holder Pull Push on side Insert the battery holder Back side Keep the battery (+) side facing up • Insert your USB data carrier • Tap on the USB-icon to access USB-playing mode • Operate USB-stick in analogy to other data-sources depending on its content (see previous page) Battery holder NOTE: Use only one CR2025(3V) lithium battery. Push Push in NOTE: Files on your USB-stick as well as their names should adhere to CD standards (ISO 9660) USB data carriers up to 8 GB, 1500 files, 200 directories are supported. Only use a piece of clean silicone cloth and neutral detergent to clean the front panel and the monitor. A rough cloth and non neutral detergent (such as alcohol) may result in scratching or discoloration. [. . . ]