User manual TECHWOOD MD65

[. . . ] CLASS 1 KLASSE 1 LUOKAN 1 KLASS 1 CLASSE 1 LASER PRODUCT LASER PRODUKT LASER LAITE LASER APPARAT PRODUIT LASER CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. Explanation Graphical Symbols: The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance(servicing) instructions in the literature accompanying the appliance. WARNING TO REDUCE THE RISK OF FIRE OF ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. To avoid electrical shock, do not open the cabinet, Refer servicing to qualified personnel only. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. [. . . ] In this case, move the microphone away from the speaker or decrease the sound level by using the MIC volume control. · If sound through the microphone is extremely loud, it may be distorted. In this case, turn the MIC volume control toward minimum. 1 2 3 Connect your microphone (not supplied) to the MIC socket. Adjust the microphone volume by turning MIC VOLUME KNOB. 9 BEFORE OPERATION 1 Press CLOCK. (If the clock is requires setting, press and hold CLOCK for more than 2 seconds. ) - The hours begin to blink. 4 5 6. 7 8 Use MULTI JOG DUAL CONTROL to set the correct hours. Timer Function The unit can set the clock function in power on/off state. With the TIMER function you can have the radio reception and recording, CD play, tape play or auxiliary source play and recording turned on and off at the time desired. 1 2 Press CLOCK to check the current time. For your reference If you don't set clock, timer function doesn't work. TUNER-CD-TAPE flashes in the display window in turn. 7 8 Set the minute to switch on by turning MULTI JOG DUAL CONTROL. `OFF TIME' indicator appears for about 0. 5 seconds in the display window and then disappears . Press SET to confirm the hour to switch off. For your reference If you want to correct the previous memorized TIMER setting, press and hold the TIMER button more than 2 seconds. - The previous memorized timer on time and TIMER indicators appear in the display. 3 4 Press SET when the desired function is flashing. SURROUND OFF SIMULA TED LOW SIMULA TED HIGH MOVIE HIGH MOVIE LOW MUSIC HIGH MUSIC LOW DISPLAY MODE Whenever you press DISPLAY MODE (DISP. MODE) on the front panel or on the remote control , you can enjoy the spectrum change with 6 types in the display. XDSS (Extreme Dynamic Sound System) - Press XDSS to reinforce treble, bass and surround effect. XDSS OFF XDSS 1 ON XDSS 2 ON 11 Presetting the radio stations You can preset 30 stations for FM and AM. Before tuning, make sure that you have turned down the volume to the minimum. PRESET DOWN/UP X TUNER/ BAND PRESET ( POWER TUNER/ BAND TAPE-A TAPE-B ) MULTI JOG DUAL CONTROL PROG. /MEMO TAPE-A APE-A TAPE-B APE-B CLEAR/SET/ TUNING DOWN/UP STOP( ) 1 2 3 4 5 6 7 8 12 Press POWER to turn on the unit. And then every time you press TUNER/BAND, FM and AM changes alternately. Press TUNING DOWN/UP on the front panel until the frequency indication starts to change, then release. Press PRESET DOWN/UP on the front panel or PRESET ( ) on the remote control to select the preset number you want. Repeat steps 4 to 7 to store other stations. TAPE-A TAPE-B To tune in a station with a weak signal Turn MULTI JOG DUAL CONTROL in step 4 to tune in the station manually. To clear all the memorized stations Press and hold PROG. /MEMO on the front panel for about two seconds, "CLEAR" appears in the display window and then press CLEAR again, the stations are cleared. For your reference If all stations have already been entered, FULL message will appear in the display window for a moment and then a preset number will flash. To change the preset number, follow the steps 6-7 on the left side. To recall presets Press and hold PRESET DOWN/UP on the front panel or PRESET ( ) on the remote control until the desired preset number appears or press it repeatedly. Tuning in automatically Press TUNING DOWN/UP. Tuning in manually Turn MULTI JOG DUAL CONTROL. Listening to the radio Preset radio stations in the units memory first (see "Presetting radio stations" on the previous page). PRESET DOWN/UP X TUNER/ BAND PRESET ( POWER TUNER/ BAND TAPE-A TAPE-B ) VOLUME ( ) VOLUME DOWN/ UP KNOB MODE/RIF TAPE-A APE-A TAPE-B APE-B 1 2 3 Press TUNER/BAND until AM or FM appears in the display window. [. . . ] Press DISC SKIP or DISC DIRECT PLAY (DISC1/2/3) on the front panel or D. SKIP on the remote control to select the disc. TAPE-A TAPE-B Press PROG. /MEMO (or PROGRAM on the remote control) on the stop mode. And then press CLEAR on the front panel or CD STOP( ) on the remote control. To add program contents 1. Press PROG. /MEMO (or PROGRAM on the remote control) repeatedly on the program stop mode until "Disc Number" blinks. Repeat 2~5 on the left side. / on the front panel or / remote control to select the track. Press or MULTI JOG DUAL CONTROL on the To modify program contents 1. [. . . ]