User manual TECHWOOD DVR98

[. . . ] DVR98 HOME THEATER SYSTEM This "QUICK-START GUIDE" will get you started without reading the complete owner's manual. However, we recommend you take time to read the owner's manual completely to learn about all of the features and operating instructions for the DVR98. The Quick Guide covers only basic connections and operating instructions. The owner's manual includes important safety information and describes in detail, the advanced features and operating instructions of the DVR98. RISK OF ELECTRIC SHOCK DO NOT OPEN QUICK-START GUIDE PLE CAUTION AS ER EA D! CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). [. . . ] (SKIP +/-, SCAN +/-) MEMORY/ PAUSE stores a station in memory in tuner mode; pauses the disc in DVD/CD mode. BAND/PLAY ­ Press to select AM or FM band in tuner mode. Press to plays back the disc in DVD/CD mode. 10 USING THE TUNER 1. To change the frequency by one step, press TUNING/PRESET or quickly (less than half a second). To tune to the next clear frequency, hold down TUNING/ or , then release the button. The PRESET system automatically tunes to the next strong station. To store stations on the other band, repeat Steps 1­6, substituting the other band in Step 1. Note: If you want to store more stations later, pressing TUNING/ or might only move the tuner to the next preset station (instead of moving the frequency one step). If this happens, press TUNING MODE to return to manual tuning (see "Switching Between Preset Stations and Manual Tuning"). PRESET Auto Preset 1. The tuner automatically begins scanning, and stores the first 30 strong signals it receives. Scanning stops automatically after radio stations are stored in the auto preset memory. To store stations on the other band, repeat Steps 1­4, substituting the other band in Step 1. Listening To FM Stereo Broadcasts In FM mode, press FM MODE to select stereo or mono. When you listen to very weak FM stereo stations, you might hear higher-than-normal background hiss. Switch to mono to eliminate the hiss. Listening to Preset Stations To listen to a radio station stored in the station memory, press or . TUNING MODE then TUNING/PRESET Presetting Radio Stations You can preset up to 30 AM and 30 FM stations regardless of the reception. Tune in the desired stations using auto or manual tuning. Switching Between Preset Stations and Manual Tuning If you store preset stations, pressing TUNING/PRESET or scrolls through the preset stations, rather than changing the frequency station by station. To switch to scrolling by individual stations, press TUNING MODE, then repeatedly press TUNING/PRESET or quickly to change the frequency by one step. PRESET To switch back to scrolling through the preset stations, press TUNING MODE, then repeatedly press TUNING/PRESET until you reach the desired station. or to tune To change the frequency by one step, press TUNING/PRESET or quickly (less than half a second). To tune to the next clear frequency, hold down TUNING/ or , then release the button. Repeatedly press TUNING/PRESET or until the desired memory location number appears. Repeat Steps 1­5 to memorize other stations (up to 30 stations for each band). If you store a new station on a memory number in which a station is stored, the old station is cleared. USING THE CD PLAYER You can use the receiver's 3-DVD changer to listen to audio CDs. CD-ROM, CD-G, photo CD, and CD-i discs cannot be played on this player. [. . . ] After checking, if needed, reconnect. Power line of a fluorescent light is installed near this product. Source being played is not recorded or broadcast in surround sound or stereo. One or more rear speaker wires is not making good contact, Place this product as far away as possible from electric devices with interference. After turning off the power and then turning it on again, reduce the volume or change to the correct 6-ohm speakers. [. . . ]