User manual TECHNOMARINE CRUISE CHRONO MAGNUM

[. . . ] The copyright of this manual is reserved by Samsung Electronics, Co. , Ltd. The contents of this manual may not be partially or in whole reproduced, distributed or used in any form without the written permission of Samsung Electronics, Co. , Ltd. The TECHNOMARINE logo and SyncMaster are the registered trademarks of Samsung Electronics, Co. , Ltd. Microsoft, Windows and Windows NT are the registered trademarks of Microsoft Corporation. [. . . ] Even if the OSD Adjustment Lock function is activated, users can adjust the brightness and contrast and can set up the adjustment function assigned to the [ ]. Users can set the <Customized Key> to one of the following functions. If the user presses the Customized Key [ ] after setting it, the configured function will be performed · < Angle> - < Bright> - <Eco Saving> - <Image Size> You can set the function of the Customized Key by selecting <SETUP&RESET > -> <Customized Key> in the OSD. / Use these buttons to navigate the menu or to adjust a value in the OSD. Use this button to control the brightness of the screen. Using the product 3-4 ICON Use this button to select a function. If you press the [ DESCRIPTION ] button when there is no OSD, the input signal (Analog/Digital) is switched. When the input signal is switched by pressing [ ] button or the product is turned on, a message displaying the selected input signal appears at the top left of the screen. This function is not available for products with an Analog interface only. AUTO Press [AUTO] button to adjust the screen settings automatically This function is only available in Analog mode. If the resolution settings are changed in the Display Properties, the AUTO adjustment function is performed. Press this button to turn the product on or off Power LED This LED is turned on when the product works normally. Color> with the original pictures. Color · · · <Demo> - You can compare the pictures processed by < <Full> - Provides a clearer picture including areas corresponding to skin color. <Intelligent> - Improves the chroma of pictures except for areas corresponding to skin color. This menu is unavailable when < Angle> is set. You can adjust the red color value of pictures according to your preference. Red This menu is unavailable when < Color> is set to <Full> mode or <Intelligent> mode. You can adjust the green color value of pictures according to your preference. Green This menu is unavailable when < Color> is set to <Full> mode or <Intelligent> mode. You can adjust the blue color value of pictures according to your preference. Blue This menu is unavailable when < Color> is set to <Full> mode or <Intelligent> mode. You can set the color temperature according to your preference. · · · · Color Tone · <Cool 2> - Sets the color temperature of the screen to very cool. <Normal> - Sets the color temperature of the screen to the standard color temperature. <Warm 2> - Sets the color temperature of the screen to very warm. · <Custom> - Select this menu to set the color temperature manually. If you do not like the preset color temperatures, you can manually adjust the value of RGB. · · This menu is unavailable when < This menu is unavailable when < Color> is set to <Full> mode or <Intelligent> mode. [. . . ] Windows XP : Change the frequency by selecting Control Panel Appearance and Themes Display Settings Advanced Monitor, and then change the refresh rate under Monitor Settings. Windows ME/2000 : Change the frequency by selecting Control Panel Display Settings Advanced Monitor, and then change the refresh rate under Monitor Settings. Windows Vista : Change the frequency by selecting Control Panel Appearance and Personalization Personalization Display settings Advanced settings Monitor, and then change the refresh rate under Monitor Settings. Windows 7 : Change the frequency by selecting Control Panel Appearance and Personalization Display Adjust resolution Advanced settings Monitor, and then change the refresh rate under Monitor Settings. (For more information, refer to the User Manual of the computer or the graphics card. ) Windows XP : Change the resolution by selecting Control Panel Appearance and Themes Display Settings. [. . . ]