User manual TECHNICS SU-V90D

[. . . ] To disconnect the AC power cord, grasp the plug itself; never pull the cord. · One blade of the plug is wider than the other for the purpose of safety and will fit into the wall outlet only one way. If you are unable to insert the plug fully into the outlet, contact your dealer. · AC power cord must be changed only at the qualified service shop. Owner's Record This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. [. . . ] Reproduces the sound characteristics of the Sony Pictures Entertainment scoring stage using the 3D sound imaging of V. MULTI DIMENSION (page 34) to create 5 sets of virtual speakers surrounding the listener from a single pair of actual rear speakers. Reproduces the sound characteristics of the Sony Pictures Entertainment "Cary Grant Theater" cinema production studio using the 3D sound imaging of V. DIMENSION (page 34) to create 5 sets of virtual speakers surrounding the listener from the sound of the front speakers (without using actual rear speakers). Reproduces the sound characteristics of the Sony Pictures Entertainment "Kim Novak Theater" cinema production studio using the 3D sound imaging of V. DIMENSION (page 34) to create 5 sets of virtual speakers surrounding the listener from the sound of the front speakers (without using actual rear speakers). Reproduces the sound characteristics of the Sony Pictures Entertainment scoring stage using the 3D sound imaging of V. DIMENSION (page 34) to create 5 sets of virtual speakers surrounding the listener from the sound of the front speakers (without using actual rear speakers). Allows you to retain a theater like environment while listening at low volume levels, such as late at night. Creates a theater like environment from movies with monaural soundtracks. Creates a theater like environment from movies recorded with stereo soundtracks Allows you to experience a theater like environment while listening through a pair of headphones. Notes CINEMA STUDIO EX. While this indicator is lit, this unit creates a sub woofer signal based on the low frequency components of the front channels. 7 Tuner indicators These indicators light when using the receiver to tune in radio stations, etc. 9 PRO LOGIC Lights when this unit applies Pro Logic processing to two channel signals in order to output the center and surround channel signals. * * However, this indicator does not light if the center and rear speakers are set to "NO" and the A. F. D. or NORMAL SURROUND sound fields are selected. Enjoying Surround Sound 4 Playback channel indicators The letters light to indicate the channels being played back. L: Front Left R: Front Right C: Center (monaural) LS: Left Surround RS: Right Surround S: Surround (monaural or the rear components obtained by Pro Logic processing) The boxes around the letters light to indicate the speakers used to playback the channels. See the next page for details regarding the playback channel indicators. The letters "L. F. E. " light up when the disc being played contains the LFE (Low Frequency Effect) channel. When the sound of the LFE channel signal is actually being reproduced, the bars underneath the letters lights up to indicate the level. Since the LFE signal is not recorded in all parts of the input signal the bar indication will fluctuate (and may turn off) during playback. 0 DTS Lights up when DTS signals are input. Note When playing a DTS format disc, be sure that you have made digital connections and that INPUT MODE is NOT set to ANALOG (see 5 on page 27). qa ; Lights when Dolby Digital (AC-3) signals are input. 36 Source sound displays The letters (L, C, R, etc. ) indicate the source sound. The boxes around the letters vary to show how the receiver downmixes the source sound (based on the speakers settings). When using music sound modes like LARGE HALL or SMALL HALL the receiver adds reverberation based on the source sound. [. . . ] The RDS information that you want does not appear. * , Contact the radio station and find out whether or not they actually provide the service in question. Nothing appears on the display , When the display turns off immediately after the receiver is turned on, press DIMMER to change the display mode. , Remove any obstacles in the path between the remote and the receiver. , Replace both batteries in the remote with new ones, if they are weak. [. . . ]