User manual TECHNICS ST-GT550

[. . . ] 37 USING THE REMOTE CONTROL UNIT 38 – 48 Random Assemble Editing . . . . . . . . . . . . . . . . . . . 48 TROUBLESHOOTING USER MAINTENANCE CAUTIONS INDEX 49 – 53 54 55 – 57 58 – 62 INSTRUCTIONS For Customer Use: Enter below the Model No. 62 SPECIFICATIONS 63 LYT0420-001B EN 2 EN Dear Customer, Thank you for purchasing this digital video camera. Before use, please read the safety information and precautions contained in the following pages to ensure safe use of this product. Using This Instruction Manual •All major sections and subsections are listed in the Table Of Contents on the cover. [. . . ] Rotate MENU/BRIGHT to move the highlight bar to “W. BALANCE”, then press it. “W. BAL. ” appears in the upper left corner and the currently selected mode indication is also displayed. “AUTO” – White balance is adjusted automatically (factory preset). “ ” – A video light or similar type of lighting is used. The indication “W. BAL. ” changes to “MANUAL”. White paper 6 Power Switch To Return To Automatic White Balance . Or, set the Power Switch to “ ”. NOTE: White balance cannot be used when Sepia or Monotone ( ੬ pg. Red paper = deeper green; blue paper = orange; yellow paper = deeper purple. NOTES: ● In step 2, it may be difficult to focus on the white paper. ● A subject can be shot under various types of lighting conditions indoors (natural, flourescent, candlelight, etc. ). Because the color temperature is different depending on the light source, the subject tint will differ depending on the white balance settings. ● Once you adjust white balance manually, the setting is retained even if the power is turned off or the battery removed. PLAYBACK Basic Playback Power Zoom Lever (VOL. ) EN 29 Power lamp A M F OF 1 2 Load a tape (੬ pg. •Press 2 to rewind, or 3 to fast-forward the tape during Stop mode. PLAY Power Switch Speaker To Control The Speaker Volume . This function overrides the “TIME CODE” and “DISPLAY” settings in the Playback Menu. To change this setting, select “INDICATION” in the Playback Menu (੬ pg. OFF– The playback sound, time code and date indications do not appear on the Playback Screen. ON– The playback sound, time code and date indications are displayed according to how “TIME CODE” and “DISPLAY” are set in the Playback Menu (factory preset). NOTE: If “INDICATION” is set in the Date/Time Menu, “INDICATION” in the Playback Menu will also be set to the same setting ( ੬ pg. 18, 20). Display 32kHz/SOUND1 TC 12 : 34 : 24 DEC 25 ’ 99 PM 5 : 30 DISPLAY (Displaying the Date During Playback) If the time has been set, the date is automatically recorded separately from the recorded video signal. To change this setting, select “DISPLAY” in the Playback Menu (੬ pg. ON– The date is displayed on the playback screen (factory preset). OFF– The date is not displayed. DEC 25 ’ 99 PM 5 : 30 TC 12 : 34 : 24 TIME CODE (Displaying The Time Code During Playback) You can display the time code on screen during playback. To change this setting, select “TIME CODE” in the Playback Menu (੬ pg. OFF– The time code does not appear (factory preset). TC 12 : 34 : 24 DEC 25 ’ 98 PM 5 : 30 Minutes Seconds Frames* *30 frames = 1 second PLAYBACK 32 EN PLAYBACK Basic Connections These are some basic types of connections. [. . . ] 14) Appears when the wind cut mode is engaged to cut down on noise created by wind. 20) * :Setting “INDICATION” to “OFF” in the Date/Time Menu lets you remove indications marked with * from the screen (੬ pg. 21). EN 61 LCD Monitor/Viewfinder Indications During Playback No. 31) 1 32kHz SOUND1 2 3 LP 4 PS WIDE 6e 1 Displays the sound mode. [. . . ]